Jawdah Industrial Co. Ltd.

T-Grid Systems · Perimeter Trim

T-Grid L-Angle Perimeter Trim (Wall Angle)

L-Angle Perimeter Trim is the L-shaped wall angle of the Jawdah T-Grid, fixed along the walls of a room so that the ends of main tees and cross tees, and the cut edge tiles, have a level ledge to rest on.

Shape
L (plain wall angle)
System
T-Grid

Overview

Quick answer

The L-Angle Perimeter Trim is the plain L-shaped wall angle used around the edge of a Jawdah T-Grid ceiling. One leg is fixed to the wall at ceiling level, the other forms a ledge on which grid ends and perimeter tiles sit. The Jawdah data list the wall angle as a T-grid component in L, W and U shapes; its size, thickness and material are confirmed per order.

Overview

Why an exposed ceiling needs an L-angle

The Jawdah T-grid data list a wall angle among the system components, in L, W and U shapes; this item is the L-shape.

Because its own dimensions and material are not yet published, this page explains what the trim does, what is sourced, and what to confirm with Jawdah before ordering.

A suspended grid hangs from the soffit, but it must also meet the walls neatly. The L-angle does that job. It is a simple right-angled profile: the vertical leg is fixed to the wall along a level line, and the horizontal leg projects into the room as a shelf. The last main tee and cross tee in each direction rest on that shelf, and so do the cut tiles that complete the ceiling at the wall.

Because the L-angle is the first member installed, it also acts as the datum for the whole ceiling: its line defines the finished height that the hangers are adjusted to. A straight, continuous perimeter angle is therefore one of the clearest signs of a well-built grid.

Jawdah's T-grid information names the wall angle as a system component and lists L, W and U shapes. The L-shape is the plain version; the W-shape has its own page. Leg lengths, thickness, length per piece and material of the Jawdah L-angle are not specified in the supplied data sheet.

Applications

General fixing guidance

Mark a level line around the room at the finished ceiling height, then fix the L-angle along it with fixings suited to the wall, at regular centres and close to each end. Form internal and external corners neatly by cutting or overlapping the legs so the horizontal shelf stays continuous. Only once the perimeter is complete are the main tees hung and adjusted to the same level.

  • Use the L-angle line as the ceiling datum.
  • Keep the horizontal leg continuous at corners.
  • Do not use the trim to carry loads other than the grid ends and edge tiles.

Compatibility

Members that meet the L-angle

The trim receives the ends of Main Tee 3600 (24) or Main Tee 3600 (15), Cross Tee 1200 and Cross Tee 600, plus the cut perimeter tiles. It belongs to the T-Grid system; concealed clip-in ceilings use a U-type perimeter member instead.

Choosing

Ordering the L-angle

Measure the perimeter of every room, add allowance for corners and joints, and state the cap finish and colour of the grid so the trim can be matched. Ask Jawdah to confirm the leg dimensions, thickness, piece length and material before the order is fixed.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

What the sources record

Only the existence and role of the wall angle are sourced. Values the data sheet gives for tees are not transferred to the trim.

L-Angle Perimeter Trim: sourced and open data
PointStatus
Listed in T-grid system contentsYes, as wall angle
Shapes listed for the wall angleL-shape, W-shape, U-shape
Leg dimensionsNot specified in the supplied data sheet
Thickness and length per pieceNot specified in the supplied data sheet
Material and finishConfirmed per order

Comparison

L-angle or W-type trim

Both are perimeter trims for the T-Grid. As general guidance, the L-angle gives a plain edge where the ceiling meets the wall, while a W-shaped trim adds a stepped profile that creates a recessed shadow line at the perimeter. The choice is an appearance decision made with the tile edge and the interior design.

Perimeter trim choice (general guidance)
TrimEdge appearanceTypical choice
L-Angle Perimeter TrimPlain ledge against the wallStandard edge for most exposed ceilings
W-Type Perimeter TrimStepped profile with a shadow lineWhere a recessed perimeter detail is designed

Key facts

  1. The L-Angle Perimeter Trim is the L-shaped wall angle of the Jawdah T-Grid.
  2. Jawdah T-grid data list the wall angle in L, W and U shapes.
  3. The L-angle carries main tee ends, cross tee ends and cut edge tiles at the walls.
  4. Dimensions, thickness and material of the Jawdah L-angle are confirmed per order.
  5. The W-Type Perimeter Trim is the stepped T-grid alternative to the L-angle.

RFQ / BOQ checklist

  • Item: L-Angle Perimeter Trim.
  • Total perimeter length per room.
  • Number of internal and external corners.
  • Grid type (T-24 or T-15) and cap colour to match.
  • Wall construction for fixings.
  • Request confirmation of dimensions and material.
  • Delivery location and phasing.

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the L-shaped wall angle fixed around a T-grid ceiling. One leg is fixed to the wall and the other forms a ledge for grid ends and edge tiles.

  • Yes. The Jawdah T-grid data list a wall angle among the system components, in L, W and U shapes.

  • Leg dimensions, thickness and piece length are not specified in the supplied data sheet. Jawdah confirms them per order.

  • As general guidance, the L-angle gives a plain edge and the W-type a stepped shadow-line edge. Choose according to the designed perimeter detail.

  • Yes, as general practice. It is fixed to a level line first and becomes the datum to which main tees are adjusted.

  • No. Jawdah's drywall metal profiles are a separate range with their own data. This page covers the T-grid perimeter trim.

Next step

Add the perimeter to your T-Grid order

Send room perimeters, corner counts and the grid colour, and the Jawdah team will confirm the L-angle data and quote it with the tees.