Jawdah Industrial Co. Ltd.

T-Grid Systems · Main Tee

T-Grid Main Tee 3600 (15) for T-15 Exposed Ceilings

Main Tee 3600 (15) is the Jawdah T-Grid main runner for ceilings built to the T-15 system type: a 3600 mm member that is hung from the structure and receives the cross tees of the grid.

Length
3600 mm
System type
T-15
Core
Galvanised iron, ASTM A653M
Fire rating (raw material)
Class A1

Overview

Quick answer

Main Tee 3600 (15) is the main runner of the Jawdah T-15 exposed ceiling grid. It is 3600 mm long, with a hot-dip galvanised iron core to ASTM A653M and a cap of pre-painted galvanised iron or aluminium. The T-grid data sheet lists 0.28 mm regular and 0.32 mm heavy-duty thicknesses; for the T-15 profile the thickness is confirmed with Jawdah when ordering.

Overview

The T-15 main runner and its role

The name gives two facts: 3600 is the length and (15) the T-15 type that the Jawdah T-grid technical data sheet names beside T-24.

Use this page to see which T-grid data apply to the T-15 main tee, which points the supplied sheet leaves open for T-15, and when to order it instead of the T-24 version.

A T-15 ceiling is chosen when the design asks for the T-15 type of exposed grid rather than the T-24 type. Its backbone is the Main Tee 3600 (15): the runner that spans the room in parallel lines, hangs on rod hangers and fixes the height of the ceiling plane. Every cross tee and every tile edge in the room depends on how straight and level these runners are set.

Jawdah supplies the T-15 main tee as part of the same T-Grid family as the T-24 version, with the same recorded length and the same material description. The difference that matters on site is the system type: T-15 main tees are combined with cross tees and trims ordered for T-15, so the visible lines of the ceiling stay consistent.

The supplied data sheet does not give section dimensions for the T-15 profile, and its thickness table is printed under a T-24 heading. Those points are therefore listed as confirmed per order rather than stated here.

Applications

Typical spaces for a T-15 grid

The Jawdah T-Grid applications cover auditoriums, cinemas, halls, computer rooms, hospitals, shops, offices, utility rooms, airports, exhibition centres, conference rooms and studios. Within that list, the T-15 type is selected by the designer as part of the ceiling's appearance; the main tee simply follows that choice.

Compatibility

Matching members for a T-15 ceiling

Order Cross Tee 1200 and Cross Tee 600 in the T-15 type to lock into this main tee, and a perimeter trim such as the W-Type Perimeter Trim or L-angle for the walls. Hangers, adjustment clips and anchor bolts come from the ceiling accessories range. Confirm with Jawdah that the chosen tile edge suits a T-15 grid before ordering tiles.

Selection pitfalls

Points to check before ordering

Most problems with T-15 main tees come from the order rather than the product.

  • Writing only "main tee 3600" without the (15) type.
  • Assuming a thickness for T-15 without confirming it.
  • Ordering T-24 cross tees for a T-15 ceiling.
  • Leaving the cap finish and colour unstated.
  • Reading Class A1 as a fire rating of the ceiling.

Choosing

Preparing a T-15 main tee enquiry

Give the Jawdah team the ceiling plan, the T-15 type, the cap finish and colour, and the tile you intend to use. The team then confirms thickness and any dimension not covered by the data sheet, and quotes the main tees with the matching cross tees, trims and hangers.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

Main Tee 3600 (15) data and open points

Values are taken from the Jawdah T-grid technical data sheet and the product name. Where the sheet does not tie a value to the T-15 profile, the row says so.

Main Tee 3600 (15): recorded data
PropertyValue
Length3600 mm
System typeT-15
Core materialHot-dip galvanised iron, ASTM A653M
Cap (face)Pre-painted galvanised iron (ASTM A653M) or aluminium
Thickness0.28 mm regular / 0.32 mm heavy duty listed for the T-grid; confirm for T-15
Fire rating (raw material)Class A1
Section dimensions and load valueNot specified in the supplied data sheet

Comparison

When to choose the T-15 main tee over the T-24 one

Both Jawdah main tees are 3600 mm long, so length never decides between them. The deciding input is the ceiling specification: if drawings, tiles or an existing ceiling are T-15, order Main Tee 3600 (15); if they are T-24, order Main Tee 3600 (24). Mixed orders are a common source of site delays because members of different types are not interchangeable in one ceiling.

Deciding between the two main tees
QuestionMain Tee 3600 (15)Main Tee 3600 (24)
System type in the specificationT-15T-24
Recorded length3600 mm3600 mm
Thickness in the data sheetConfirm for T-150.28 mm regular / 0.32 mm heavy duty

Key facts

  1. Main Tee 3600 (15) is the 3600 mm main runner of the Jawdah T-Grid for T-15 ceilings.
  2. The (15) in the name refers to the T-15 system type of the Jawdah T-grid data sheet.
  3. The T-15 main tee core is hot-dip galvanised iron complying with ASTM A653M.
  4. The T-grid data sheet thickness table (0.28 mm regular, 0.32 mm heavy duty) appears under a T-24 heading; T-15 thickness is confirmed per order.
  5. The Jawdah T-grid raw material is recorded as Class A1.

RFQ / BOQ checklist

  • Item: Main Tee 3600 (15) and quantity.
  • Confirm thickness for the T-15 profile.
  • Cap finish and colour.
  • Matching T-15 cross tees and perimeter trim.
  • Tile type and edge detail.
  • Ceiling plan, plenum depth and soffit type.
  • Delivery location and phasing.

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It refers to the T-15 system type that the Jawdah T-grid technical data sheet lists beside T-24. The item is the main tee for T-15 ceilings.

  • No. Both Jawdah main tees are recorded at 3600 mm. They differ by system type, not by length.

  • The T-grid data sheet lists 0.28 mm regular and 0.32 mm heavy duty, but prints that table under a T-24 heading. Jawdah confirms the thickness for the T-15 main tee per order.

  • Hot-dip galvanised iron complying with ASTM A653M, with a visible cap of pre-painted galvanised iron or aluminium.

  • They should not be combined in one ceiling. Order every main tee, cross tee and trim of a room for the same system type.

  • No numerical value is given in the supplied data sheet. Light fittings and other loads on the grid are reviewed with Jawdah per project.

Next step

Quote T-15 main tees

Share the ceiling plan, cap finish and tile choice, and the Jawdah team will confirm the T-15 thickness and quote Main Tee 3600 (15) with matching members.