Jawdah Industrial Co. Ltd.

Sandwich Panel Accessories · Sealing

Silicon Sealant for Sandwich Panel Joints and Edges

Silicon is the gun-applied silicone sealant in the Jawdah sandwich panel accessories range, used to seal exposed joints, flashing ends, panel edges and penetrations after the panels and flashings are fixed.

Grade and colour
Confirmed per project
Silicone sealant cartridge loaded in a caulking gun, for sealing sandwich panel joints

Overview

Quick answer

Silicon in the Jawdah accessories list is a silicone sealant: a paste applied from a cartridge with a sealant gun that cures into a flexible rubber-like seal. On sandwich panel buildings it seals exposed wall joints, flashing ends, edges at doors and windows, and roof or wall penetrations. Jawdah supplies it as a panel accessory; grade, colour and cartridge size are confirmed per project.

Overview

What the Silicon item is

Some gaps on a panel building can only be closed once everything is in place: the end of a flashing, the edge of a wall panel at a frame, or a pipe through the roof. A cartridge sealant fills these. Jawdah lists it as Silicon and confirms type and quantity per project.

The product name is Silicon, but the product is a silicone sealant. Silicon is the chemical element; silicone is the flexible polymer made from it that is sold in cartridges for sealing joints. On this page the item keeps its product name, and the text describes it as silicone sealant so buyers can match it to their specifications.

Silicone sealant stays flexible after it cures, so it can follow the small movements of metal panels as they heat and cool. That makes it suited to joints that are visible and reachable after fixing, in contrast with Strip Sealant, which is laid inside laps before the next sheet goes on.

Applications

Where silicone sealant is used on panel buildings

Typical positions, as general guidance:

  • Vertical and horizontal joints of wall panels where specified
  • Ends of flashings, cappings and trims
  • Junctions of wall panels with door and window frames
  • Around pipes, ducts and fixings that pass through the panels
  • Gutter ends and outlet joints
  • Cold room panel joints where the project calls for a sealed finish

Installation

Applying silicone so it lasts

Silicone bonds only to clean, dry and dust-free surfaces, so wipe the metal and remove loose dust and protective film from the joint area first. Cut the nozzle to suit the joint width, apply a continuous bead that wets both sides of the joint, and tool it smooth within the working time so it is pressed into contact. Avoid three-sided adhesion in moving joints; a backing rod or bond-breaker at the bottom of the joint lets the bead stretch.

Do not apply in blowing sand or on very hot metal in the middle of the day, and keep the finished bead free of dust until it has skinned.

Selection pitfalls

Typical sealant problems

Most sealant failures come from preparation rather than the product.

  • Sealant applied over dust, oil or protective film
  • A thin smear instead of a tooled bead
  • Silicone used to repair a missing flashing or closure
  • Sealant used inside closed laps instead of a strip
  • Colour not agreed for visible wall joints

Compatibility

Compatibility with panels and finishes

Ask for a sealant suited to metal and to the panel coating, and agree the colour where joints are visible on Wall Sandwich Panels. Sealant is a finishing item, not a substitute for a correctly lapped flashing: water should be shed by the Wall Flashings and roof flashings first, with silicone closing the remaining small gaps.

Choosing

Ordering silicone sealant

Estimate the total length of joints, ends and penetrations to be sealed and note which are visible, so colour can be agreed. Send this with the panel and flashing schedule; the Jawdah team confirms the sealant and quantity and lists it with the other accessories.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Specifications recorded for this item

Jawdah lists the item as Silicon in its sandwich panel accessories range. No grade, cure type, colour, movement capability or cartridge size is published, so the table shows what is confirmed per project.

Silicon (silicone sealant): published data
PropertyJawdah data
ItemSilicon (accessory of the sandwich panel range)
Sealant grade and cure typeNot published; confirmed per project
ColourNot published; confirmed per project
Pack sizeNot published; confirmed per project

Comparison

Silicon or strip sealant?

Both items seal, but they are not interchangeable. The table is general guidance.

Silicon compared with strip sealant (general guidance)
QuestionSiliconStrip Sealant
AppliedFrom a cartridge after fixingAs a strip before fixing
Typical jointExposed joints, ends, penetrationsClosed laps between sheets
Visible after workYes, finished beadNo, hidden in the lap

Key facts

  1. Silicon is listed in the Jawdah sandwich panel accessories range.
  2. Silicon in the Jawdah list is a silicone sealant applied from a cartridge.
  3. Silicone sealant suits exposed joints, flashing ends and penetrations.
  4. Strip Sealant is the separate Jawdah accessory for closed laps.
  5. Jawdah does not publish sealant grade, colour or pack size; they are confirmed per project.

RFQ / BOQ checklist

  • Joints, ends and penetrations to be sealed
  • Estimated total joint length
  • Visible joints and required colour
  • Panel coating or facing material
  • Site exposure (inland or coastal)
  • Other sealing items needed (strip, closures)

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. Silicon is the product name; the item is a silicone sealant applied from a cartridge to seal joints on panel buildings.

  • On exposed joints that can be reached after fixing: flashing ends, panel edges at frames, gutter joints and penetrations through the panels.

  • It is not the usual choice. Laps close once the next sheet is fixed, so a pre-formed strip laid before fixing gives a more consistent seal.

  • No. Grade, colour and pack size are confirmed for each project. State where the sealant will be visible so colour can be agreed.

  • Usually because it was applied over dust, oil or protective film, or on very hot metal. Clean, dry surfaces and a tooled bead give proper adhesion.

  • Only as a temporary measure. A leak at a flashing usually means a missing lap, closure or fixing, and that cause should be corrected.

Next step

Add sealant to your panel order

Send the joints and penetrations to be sealed and any colour needs. The Jawdah team will confirm the silicone sealant and include it in your quotation.