Jawdah Industrial Co. Ltd.

3-Rib Roof Panels · 150 mm

3-Ribs Roof Sandwich Panels — 150 mm

The 150 mm 3-rib roof panel is the deepest thickness Jawdah lists for its three-rib PIR roof panel, one step beyond the 100 mm panel.

Profile
High rib, 3 ribs
Core thickness
150 mm
R-value (core)
Confirmed by Jawdah on request
U-value (core)
Confirmed by Jawdah on request
3-Ribs Roof Sandwich Panels 150 mm

Overview

Quick answer

Jawdah lists a 150 mm thickness of its 3-rib high-rib PIR roof panel, and Jawdah's data sheet includes 150 mm in its dimension table. The thermal values for this thickness are confirmed by Jawdah with the quotation, so they are not published on this page. Confirm availability with Jawdah too.

Overview

What is known about the 150 mm three-rib panel

Its thermal value is not yet published and is confirmed by Jawdah on request.

This page sets out what is confirmed for 150 mm, what to ask before ordering, and how it relates to the 100 mm panel and the 3-Rib Roof Sandwich Panels page.

The 150 mm panel follows the same build as the rest of the three-rib range: a rigid PIR core bonded between a high-rib outer sheet with three deep ribs and a semi-corrugated or plain inner sheet. What changes is the depth of insulation, which is half as deep again as the 100 mm panel.

Two facts are confirmed: the thickness appears in Jawdah's product list, and it appears in the dimension table of Jawdah's data sheet. Two points are open: the thermal values for this thickness, which Jawdah confirms with the quotation, and current availability. Ask for both in writing.

Types

150 mm in three ribs or five ribs

The 5-rib 150 mm panel has the same open point: its thermal values are also confirmed by Jawdah with the quotation. Choose the profile by the roof: three ribs for long runs and wide troughs, five ribs for a finer surface or a visible soffit.

3-rib and 5-rib at 150 mm
Aspect3-rib, 150 mm5-rib, 150 mm
Core R-value (m²·K/W)Confirmed by Jawdah on requestConfirmed by Jawdah on request
Core U-value (W/m²·K)Confirmed by Jawdah on requestConfirmed by Jawdah on request
Rib patternBold, widely spacedFiner, closely spaced
TroughsWideNarrower
Geometry and spansConfirmed per projectConfirmed per project

Pattern and trough rows are general guidance on rib count, not Jawdah measurements.

Applications

Roofs that may need more than 100 mm

Jawdah lists temperature-controlled facilities among its roof applications. As general guidance, a core deeper than 100 mm is considered where a roof sits over a space held at a low temperature, or where the energy model needs a roof U-value below the 0.23 W/m²·K of the 100 mm panel.

  • Roofs over cold rooms and chilled storage halls
  • Temperature-controlled logistics buildings
  • Buildings with strict roof energy targets
  • Projects matching a deep wall panel on the same building

Choosing

Before you specify 150 mm 3-rib panels

Ask Jawdah to confirm three things in writing before you specify: that 150 mm is a current 3-rib thickness, its R- and U-values, and the span, weight and fastener length at this depth.

Send the roof plan, slope, purlin spacing, wind exposure and design temperature with the request, and order ridge, eave and gable flashings and fillers sized for a 150 mm panel.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

What the sources confirm for the 150 mm 3-rib panel

The 150 mm row is listed in the product list and in the dimension table of Jawdah's data sheet. The family facts below come from the parent roof pages; the thermal row is the exception.

  • Core thickness: 150 mm, 3-rib high-rib profile
  • Thermal row: confirmed by Jawdah with the quotation
  • Insulation core: PIR; DIN 4102 B2 stated for the core material
  • Internal face: semi-corrugated or plain
  • Facings: PPGI, aluminium, stainless steel or galvanised iron
  • Coating: polyester or PVDF; Cloud White standard

Specifications

150 mm values: confirmed, withheld and missing

For the other thicknesses, the data sheets calculate R by dividing the core thickness by λ = 0.023 W/m·K. The 150 mm value is not shown here; Jawdah confirms the thermal values for this thickness with the quotation. Geometry, spans and weight are also not in the supplied data.

3-rib roof panel, 150 mm: Jawdah data-sheet values
PropertyValue
Core thickness150 mm
Insulation corePIR, λ = 0.023 W/m·K (calculation basis)
R-value (core only)Confirmed by Jawdah on request
U-value (core only)Confirmed by Jawdah on request
ProfileHigh rib, 3 ribs per panel width
Internal faceSemi-corrugated or plain
Cover width, rib height and spacingNot specified in the supplied data sheet
Span, load and panel weightNot specified in the supplied data sheet

Comparison

150 mm in the 3-rib thickness table

The published 3-rib values run from U 0.77 at 30 mm to U 0.23 at the 100 mm panel. This thickness has no published value; Jawdah confirms it on request. If a project's calculation can be met with 100 mm, that thickness has a confirmed value.

3-rib roof panel thicknesses (Jawdah data sheet)
Core thicknessR-value (m²·K/W)U-value (W/m²·K)
30 mm1.300.77
50 mm2.170.46
75 mm3.260.31
100 mm4.350.23

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Key facts

  1. Jawdah lists a 150 mm core thickness of its 3-rib high-rib PIR roof sandwich panel.
  2. The 150 mm 3-rib thermal values are not published and are confirmed by Jawdah with the quotation.
  3. Jawdah's 3-rib data sheet publishes thermal values for 30, 50, 75 and 100 mm and lists 150 mm in its dimension table.
  4. The deepest 3-rib panel with a published value is 100 mm, at U 0.23 W/m²·K.
  5. Availability, thermal values, spans and weight of the 150 mm 3-rib panel should be confirmed in writing.

RFQ / BOQ checklist

  • Profile and thickness: 3-rib, 150 mm
  • Roof area, slope and purlin spacing
  • Wind exposure and maintenance traffic
  • External facing, coating and colour
  • Internal face: semi-corrugated or plain
  • Panel lengths and quantities
  • Matching ridge, eave and gable flashings and fillers
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is confirmed by Jawdah with the quotation, so this page publishes no value for this thickness.

  • It is in Jawdah's product list and in the dimension table of Jawdah's data sheet. Ask Jawdah to confirm availability for your project.

  • The thermal values for this thickness are confirmed by Jawdah with the quotation. The published 3-rib values cover 30 to 100 mm.

  • Typically over cold rooms or chilled storage, or where the energy model needs a roof U-value lower than the 0.23 W/m²·K of the 100 mm panel. Confirm this thickness's value with Jawdah first.

  • Yes. The 3-rib range uses a rigid PIR core; only the core depth changes. The internal face is semi-corrugated or plain.

  • As general guidance, a deeper panel is heavier, needs longer fasteners and wider flashings and fillers. Jawdah confirms these details with the span data per project.

Next step

Confirm 150 mm 3-rib panels with Jawdah

Send the roof plan, design temperature and purlin spacing. Jawdah will confirm availability, the 150 mm thermal value, spans and a quotation.