Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 10x10

Concealed Square Floor Drain 10x10

The 10x10 is the smallest size of Jawdah's Concealed Square Floor Drain, a stainless steel floor drain with a hidden design.

Size
10x10
Hole size
1.5”
Accessories
Strainer

Overview

Quick answer

The Concealed Square Floor Drain 10x10 is a square stainless steel floor drain with a hidden (concealed) design. Jawdah's product data gives it a 1.5 inch hole and a stainless steel thickness of 1 mm, and the datasheet lists a strainer as its accessory. Material is stainless steel 304/316 per the datasheet, while range data lists deep-drawing 304.

Overview

About Concealed Square Floor Drain 10x10

In a small shower tray or a compact bathroom floor, a large grate can look out of place. The 10x10 Concealed Square Floor Drain is the smallest of the three sizes Jawdah lists for this drain, below 15x15 and 20x20. Its hidden design keeps the drain discreet in the floor, and its outlet is the smallest of the range at 1.5 inch.

This size has its own data in Jawdah's product records: a 1.5 inch hole size and stainless steel 1 mm thick, with the design described as hidden. The accessory listed in the datasheet for this size is a strainer, which sits in the drain to catch hair and debris before the outlet.

On material, the datasheet gives stainless steel 304/316. A separate range-level note lists deep-drawing 304 stainless steel; that line describes the drain family rather than this size alone, so the grade for an order is confirmed with the quotation.

The siblings differ in outlet and accessory as well as size, so check the pipe the drain must connect to, and the floor level, before choosing between them.

Choose the 10x10 when the drain must connect to a small outlet and the floor area is compact. The 15x15 and 20x20 pages list larger hole sizes and a plastic drain among their accessories, so compare outlets first. Confirm the stainless steel grade, the finished floor level and the outlet position with Jawdah before ordering.

Types

Sizes and variants

Other listed sizes of this product: 15x15 and 20x20.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Typical use: shower trays and small shower areas with a compact tiled floor
  • Bathroom floors where a discreet drain point is preferred
  • Small wet rooms and service areas connected to a narrow outlet pipe

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Square Floor Drain 10x10: recorded data
PropertyValueSource
Size / model (product list)10x10Jawdah product list
Hole size1.5”Jawdah product data
AccessoriesStrainerDatasheet
MaterialStainless steel 304/316 (datasheet); range data lists deep-drawing 304Datasheet
SS thickness1 mmJawdah product data
DesignHiddenJawdah product data

Key facts

  1. Concealed Square Floor Drain 10x10 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a square stainless steel floor drain with a concealed (hidden) cover.
  3. Recorded for this size: hole size: 1.5”; accessories: Strainer.
  4. Range data: material: Stainless steel 304/316 (datasheet); range data lists deep-drawing 304.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (10x10)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Jawdah's product data gives a 1.5 inch hole size for the 10x10. The other two sizes of this drain have their own hole sizes, so check the sibling pages if your outlet is larger.

  • The datasheet lists a strainer as the accessory for this size.

  • The datasheet gives stainless steel 304/316, and range data lists deep-drawing 304 for the family. The grade for your order is confirmed with the quotation.

Next step

Request a quotation for Concealed Square Floor Drain 10x10

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.