Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 20x20

Concealed Square Floor Drain 20x20

The 20x20 is the largest size of Jawdah's Concealed Square Floor Drain, with a 4 inch hole and a plastic drain listed as its accessory.

Size
20x20
Hole size
4”
Accessories
Plastic drain

Overview

Quick answer

The Concealed Square Floor Drain 20x20 is a hidden-design square floor drain in stainless steel. Jawdah's product data gives a 4 inch hole and 1 mm stainless steel, and the datasheet lists a plastic drain as the accessory. The datasheet material is stainless steel 304/316; range data for the family lists deep-drawing 304.

Overview

About Concealed Square Floor Drain 20x20

Larger wet floors, such as commercial kitchens or shared washrooms, often connect to a bigger drainage pipe. The 20x20 Concealed Square Floor Drain is the top size of three in Jawdah's list, above 10x10 and 15x15, and carries the range's largest hole at 4 inch. The hidden design still keeps the drain discreet in the floor finish.

For the 20x20, Jawdah's product data lists a 4 inch hole size, stainless steel 1 mm thick and a hidden design. The datasheet names a plastic drain as the accessory, rather than the strainer listed for the 10x10.

Material per the datasheet is stainless steel 304/316. Range-level data for the whole drain family also lists deep-drawing 304; because that line is not specific to the 20x20, the grade supplied is confirmed with the quotation.

With the largest square and outlet of the three sizes, this drain is the one to compare when the outlet pipe on the drawings is larger than the smaller sizes take. Any other value not shown here is confirmed by Jawdah for the order.

Pick the 20x20 when the drainage drawings show a larger outlet or the floor is large enough for a 20x20 square. If the outlet is smaller, the 15x15 and 10x10 pages list smaller hole sizes. Confirm the plastic drain accessory, the stainless steel grade and the finished floor level with Jawdah before ordering.

Types

Sizes and variants

Other listed sizes of this product: 10x10 and 15x15.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Typical use: commercial kitchen floors connected to a larger drainage pipe
  • Shared washrooms and wet service rooms with a larger floor area
  • Tiled utility floors where a discreet but larger drain is wanted

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Square Floor Drain 20x20: recorded data
PropertyValueSource
Size / model (product list)20x20Jawdah product list
Hole size4”Jawdah product data
AccessoriesPlastic drainDatasheet
MaterialStainless steel 304/316 (datasheet); range data lists deep-drawing 304Datasheet
SS thickness1 mmJawdah product data
DesignHiddenJawdah product data

Key facts

  1. Concealed Square Floor Drain 20x20 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a square stainless steel floor drain with a concealed (hidden) cover.
  3. Recorded for this size: hole size: 4”; accessories: Plastic drain.
  4. Range data: material: Stainless steel 304/316 (datasheet); range data lists deep-drawing 304.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (20x20)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The 20x20. Jawdah's product data gives it a 4 inch hole size, the largest of the three sizes in this range.

  • The datasheet lists a plastic drain as the accessory for this size.

  • Jawdah's product data gives 1 mm stainless steel for the 20x20, the same figure shown on the 10x10 and 15x15 pages. Material is stainless steel 304/316 per the datasheet.

Next step

Request a quotation for Concealed Square Floor Drain 20x20

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.