Stainless Steel Floor Drains · 15x15
Concealed Square Floor Drain 15x15
The 15x15 Concealed Square Floor Drain is the middle size of Jawdah's hidden stainless steel square drain, with a 3.5 inch hole.
- Size
- 15x15
- Hole size
- 3.5”
- Accessories
- Plastic drain / strainer
Overview
Quick answer
It is a square stainless steel floor drain with a hidden design, in the 15x15 size. Jawdah's product data gives a 3.5 inch hole and a 1 mm stainless steel thickness, and the datasheet lists a plastic drain or a strainer as accessories. The datasheet material is stainless steel 304/316, with range data listing deep-drawing 304.
Overview
About Concealed Square Floor Drain 15x15
Bathrooms and kitchen floors that take more water than a shower tray usually call for a bigger outlet. The 15x15 Concealed Square Floor Drain sits between the 10x10 and 20x20 in Jawdah's list and moves up to a 3.5 inch hole. Its hidden design keeps the drain low-key on a tiled floor.
Jawdah's product data for this size records a hole size of 3.5 inch, stainless steel 1 mm thick and a hidden design. For accessories, the datasheet lists a plastic drain or a strainer, which gives two ways to fit the drain to the site's pipework and cleaning routine.
The datasheet names stainless steel 304/316 as the material. A broader line of range data, written for the drain family as a whole, lists deep-drawing 304; it is not a value specific to the 15x15, so the grade is confirmed with the quotation.
Compared with the 10x10, this size has a larger outlet and a choice of accessory; compared with the 20x20, it keeps a smaller square on the floor.
The 15x15 suits floors where the outlet pipe is larger than the 10x10 can take but a 20x20 square would be more than the tile layout needs. Compare the hole size on each page against the drainage drawings, decide between the plastic drain and the strainer, and confirm the stainless steel grade with Jawdah.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Typical use: bathroom floors with a standard outlet pipe
- Kitchens and wet service rooms where a hidden drain point is preferred
- Tiled floors in washrooms that need a discreet drain
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 15x15 | Jawdah product list |
| Hole size | 3.5” | Jawdah product data |
| Accessories | Plastic drain / strainer | Datasheet |
| Material | Stainless steel 304/316 (datasheet); range data lists deep-drawing 304 | Datasheet |
| SS thickness | 1 mm | Jawdah product data |
| Design | Hidden | Jawdah product data |

Key facts
- Concealed Square Floor Drain 15x15 is listed under Sanitary Ware & Drainage Solutions.
- Role: a square stainless steel floor drain with a concealed (hidden) cover.
- Recorded for this size: hole size: 3.5”; accessories: Plastic drain / strainer.
- Range data: material: Stainless steel 304/316 (datasheet); range data lists deep-drawing 304.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (15x15)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Jawdah's product data lists a 3.5 inch hole size for this drain.
The datasheet lists a plastic drain or a strainer as the accessory for this size. State which one you need in the enquiry so it is confirmed with the quotation.
Jawdah's product data gives a stainless steel thickness of 1 mm. The datasheet material is stainless steel 304/316.

Next step
Request a quotation for Concealed Square Floor Drain 15x15
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

