Sandwich Panel Accessories · Rainwater
Down Spout for Sandwich Panel Roof Drainage
The Down Spout is the vertical rainwater pipe in the Jawdah sandwich panel accessories range that carries water from the roof gutter down the wall to ground level or to a drain.
- Size and material
- Confirmed per project
Overview
Quick answer
A down spout, also called a downpipe, is the vertical pipe that drains a roof gutter. On a sandwich panel building it connects to the outlet of the eave or valley gutter, runs down the wall and discharges at grade or into a drain, using elbows to change direction. Jawdah supplies down spouts as panel accessories; size and material are confirmed per project.
Overview
Where the down spout sits in a panel roof
A panel roof sheds water quickly to its eaves, and the gutter collects it, but the down spout decides where that water ends up. Jawdah lists it as an accessory and confirms its size, material and quantity for each building.
On a sandwich panel roof, rain runs down the panel ribs to the eave, drops into the gutter and travels along it to an outlet. From there the down spout takes over: a closed pipe that carries the water down the face of the wall so it does not pour over the eave, stain the wall panels or wash out the ground at the base of the building.
In the Jawdah range the gutters are formed flashings, such as the RF-101 Eave Gutter and the RF-102 Valley Gutter, while the down spout and the Elbow are listed among the accessories. Ordering them together keeps the outlet and pipe matched.
How it works
How roof water reaches the ground
The chain is simple: roof panel, gutter, gutter outlet, down spout, discharge. Each link has to carry the same flow. If the outlet or pipe is too small or too few, water backs up in the gutter during a heavy storm and can overflow inward at the eave, which is the costliest kind of leak on a panel building. Elbows at the top bring the pipe from the gutter outlet back to the wall, and at the bottom turn the flow away from the foundation.
Types
Down spout, elbow and gutter: who does what
The three rainwater parts are often confused in a bill of quantities. The table separates them; it is general guidance.
| Part | Job | Listed by Jawdah as |
|---|---|---|
| Eave or valley gutter | Collects water along the roof edge or valley | Roof flashing (RF-101, RF-102) |
| Down Spout | Carries water vertically down the wall | Accessory |
| Elbow | Changes the direction of the pipe | Accessory |
Performance
Planning down spout positions
The number and size of down spouts follow the roof area draining to each gutter run and the design rainfall used for the project; this is general practice, and the figures come from the project's drainage design rather than from a Jawdah table. Spread outlets so that no gutter run carries more than its share, and keep pipes away from doors, loading bays and walkways where discharge would be a nuisance.
Plan the pipe route on the wall elevation: it should run straight down, clear of panel joints and openings, with fixing points into the structure behind the wall panels rather than only into the facing.
Applications
Installation points to check
Connect the pipe to the gutter outlet with a sealed joint, then bring it back to the wall with elbows. Fix brackets at regular intervals into structure, and keep the pipe plumb so it drains freely. Joints between pipe lengths are normally lapped downward, upper piece inside lower, so water cannot escape at the joint. At the base, discharge onto a splash area or into the site drainage, never against the panel base detail.
Selection pitfalls
Mistakes that cause overflow
Most gutter overflows on panel buildings trace back to one of these.
- Too few down spouts for the roof area
- Pipe size not matched to the gutter outlet
- Discharge left at the wall base
- Brackets fixed only into thin facing
- Gutters and down spouts bought from separate sources without checks
Choosing
Ordering down spouts with your roof package
Send the roof plan with gutter runs, the eave height, the number of outlets you plan and the site location. The Jawdah team confirms the down spout size and material and lists it in the quotation with the gutters, elbows and other accessories.
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Specifications recorded for this item
Jawdah lists the Down Spout by name in its sandwich panel accessories range. No diameter, shape, material or length data is published, so the table shows what is confirmed per project.
| Property | Jawdah data |
|---|---|
| Item | Down Spout (accessory of the sandwich panel range) |
| Section shape and size | Not published; confirmed per project |
| Material and finish | Not published; confirmed per project |
| Lengths and fixing brackets | Not published; confirmed per project |

Key facts
- The Down Spout is listed in the Jawdah sandwich panel accessories range.
- A down spout carries rainwater vertically from a roof gutter outlet to ground or drain.
- Jawdah lists the RF-101 Eave Gutter and RF-102 Valley Gutter as roof flashings.
- Elbows are listed separately in the Jawdah accessories range.
- Jawdah does not publish down spout sizes or materials; they are confirmed per project.
RFQ / BOQ checklist
- Roof plan with gutter runs and outlets
- Eave height for pipe lengths
- Gutter type (eave or valley)
- Number of down spouts and elbows
- Site location and exposure
- Discharge detail at the base
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It is the vertical pipe that takes water from the roof gutter outlet down the wall to the ground or to a drain.
Yes. The Down Spout is listed in the Jawdah sandwich panel accessories range. Its size, material and quantity are confirmed for each project.
Yes. Down spout, downspout and downpipe are names for the same vertical rainwater pipe.
It depends on the roof area draining to each gutter and the design rainfall. Jawdah does not publish a sizing table; the drainage design for the project sets the number.
The gutter outlet usually sits out from the wall, so elbows bring the pipe back to the wall at the top and turn the discharge away from the base at the bottom.
On Jawdah panel roofs it connects to the outlets of the formed gutters, such as the RF-101 Eave Gutter and RF-102 Valley Gutter in the roof flashing range.

Next step
Add down spouts to your roof quotation
Send the roof plan, gutter runs and eave height. The Jawdah team will confirm the down spouts and elbows and include them in your quotation.



