Jawdah Industrial Co. Ltd.

Cold Room Wall Panels · 200 mm

Cold Room Wall Sandwich Panel — 200 mm

The 200 mm cold room wall panel is the deepest PIR core in Jawdah's cold room range; Jawdah confirms its thermal values with the quotation.

Thickness
200 mm
R-value (core)
Confirmed by Jawdah on request
U-value (core)
Confirmed by Jawdah on request
Core
Rigid PIR
Cold Room Wall Sandwich Panels 200 mm

Overview

Quick answer

Jawdah's 200 mm cold room wall panel is the thickest PIR-core panel in its cold room range. Jawdah confirms its thermal values with the quotation. As general guidance it is kept for the largest temperature differences, and its availability is confirmed with Jawdah.

Overview

What the 200 mm cold room panel is

Jawdah lists the 200 mm thickness in its cold room range and confirms its thermal values with the quotation; availability is confirmed per order. Room design basics are on the cold room wall sandwich panel page.

A 200 mm rigid PIR core between two metal facings makes this the most heavily insulated wall element in Jawdah's cold room data. It is four times as deep as the 50 mm panel.

Its thermal values are confirmed by Jawdah with the quotation. Treat the thickness as available on confirmation.

Applications

Where a 200 mm cold room wall typically fits

As general industry practice, the deepest cores are kept for rooms with the largest temperature differences, such as low-temperature frozen storage, or for rooms where the refrigeration load must be cut as far as possible, for example in exposed outdoor locations. Jawdah does not publish set points per thickness, so a heat-load calculation must justify 200 mm.

If the calculation is met with less, the 150 mm or 100 mm panels give thinner walls; the 100 mm panel also has values on Jawdah's data sheet.

Installation

Installing and commissioning a 200 mm cold room

With so little heat passing through the panel, detailing sets the real performance. As general practice for the coldest rooms, insulate the floor and provide a thermal break at the base, seal joints and corners continuously, sleeve every penetration, and pull the room temperature down gradually at commissioning. Trims come from the wall flashings range.

Choosing

Ordering 200 mm cold room panels

Ask Jawdah to confirm 200 mm availability, the applicable data sheet and panel lengths, then send room sizes, set temperature, surroundings, heat-load result, faces, ceiling arrangement, floor detail, doors and quantities.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

What Jawdah lists for 200 mm

Jawdah lists 200 mm at the end of a five-thickness cold room range that starts at 50 mm. For 200 mm, Jawdah confirms the thermal values with the quotation.

  • Thickness: 200 mm
  • Core: rigid PIR
  • R- and U-values: confirmed by Jawdah with the quotation
  • Range: 50, 75, 100, 150 and 200 mm
  • Availability and lengths: confirmed by Jawdah

Specifications

Thermal values of the 200 mm cold room panel

Jawdah confirms the R- and U-values of the 200 mm panel with the quotation. Core values exclude surface resistances and thermal bridging, and at this level bridging at joints and the floor can be a large share of the total heat gain.

Cold room wall panel 200 mm: thermal values
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)
200 mmConfirmed by Jawdah on requestConfirmed by Jawdah on request

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Comparison

200 mm compared with the other cold room thicknesses

Jawdah's data sheet gives U 0.46, 0.31 and 0.23 W/m²·K for 50, 75 and 100 mm; each extra step of core thickness buys a smaller reduction in heat flow. For 150 and 200 mm, Jawdah confirms the thermal values with the quotation, and 200 mm doubles the wall depth of the 100 mm panel.

Weigh that gain against the added depth, weight and room footprint, and confirm availability before the design depends on it.

Cold room wall panel thicknesses compared (Jawdah's data sheet)
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)Listed on
50 mm2.170.46Jawdah's data sheet
75 mm3.260.31Jawdah's data sheet
100 mm4.350.23Jawdah's data sheet
150 mmConfirmed by Jawdah on requestConfirmed by Jawdah on requestListed by Jawdah
200 mm (this page)Confirmed by Jawdah on requestConfirmed by Jawdah on requestListed by Jawdah

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Materials

Faces for a 200 mm cold room

The Jawdah wall range offers PPGI, aluminium, stainless steel and galvanised iron facings, polyester or PVDF coating, and Cloud White as standard. Select the internal face for washing and hygiene audits and the external face for its surroundings; stainless steel is the general choice where cleaning is aggressive.

Key facts

  1. Jawdah lists a 200 mm PIR cold room wall panel in its cold room range.
  2. 200 mm cold room wall panel: R- and U-values confirmed by Jawdah with the quotation.
  3. 200 mm is the deepest of the cold room thicknesses 50, 75, 100, 150 and 200 mm.
  4. Availability of the 200 mm cold room panel is confirmed by Jawdah per order.
  5. The 100 mm cold room panel core has U 0.23 W/m²·K on Jawdah's data sheet.
  6. Jawdah does not publish cold room temperature ranges per thickness.

RFQ / BOQ checklist

  • Room internal dimensions and number of rooms
  • Required room set temperature
  • Surroundings: inside a conditioned hall, an unconditioned hall or outdoors
  • Refrigeration heat-load result or target wall U-value
  • Panel thickness: 200 mm
  • Internal face material and coating for the cleaning regime
  • External face material, coating and colour
  • Ceiling arrangement and floor detail
  • Door sizes, positions and penetrations
  • Project location and delivery schedule

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Jawdah confirms the U-value and R-value of the 200 mm PIR core with the quotation.

  • Jawdah lists 200 mm in its cold room range. Confirm availability and values with Jawdah before ordering.

  • As general guidance, for the largest temperature differences or exposed rooms where the refrigeration load must be minimised, and only when a heat-load calculation shows the gain over 150 mm is worthwhile.

  • Each extra step of core thickness buys a smaller reduction in heat flow. Jawdah confirms the 150 and 200 mm values with the quotation, so the added depth and weight need to be justified.

  • No. Condensation usually comes from thermal bridges or air leaks at the floor, corners and penetrations, which need sealed and insulated details at any thickness.

  • No. Temperature ranges per thickness are not published; Jawdah confirms the panel build-up per project.

  • As general practice, pull the temperature down gradually at commissioning so that joints and sealants are not stressed by a sudden change.

Next step

Request 200 mm cold room wall panels

Send the room sizes, set temperature, surroundings and heat-load result. The Jawdah team will confirm 200 mm availability, panel lengths and a quotation.