Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x30

Concealed Linear Floor Drain 8.5x30

The 8.5x30 is the shortest standard size of Jawdah's Concealed Linear Floor Drain, a stainless steel channel drain with a concealed cover.

Size
8.5x30

Overview

Quick answer

Concealed Linear Floor Drain 8.5x30 is the most compact of the seven standard sizes Jawdah lists for this stainless steel linear drain with a concealed cover. Its datasheet covers the range in 304/316 stainless steel, but lists 10-wide sizes rather than 8.5, so exact dimensions and finish for this size are confirmed with the quotation.

Overview

About Concealed Linear Floor Drain 8.5x30

Where a shower is narrow or the drain line only needs to cover a short run, the 8.5x30 is the size to look at first. It opens Jawdah's list of concealed linear drains, which climbs in even steps up to 8.5x90. The channel sits along one edge of the floor, and the concealed cover keeps the drain line discreet within the tiling.

This page covers one length: 8.5x30, the shortest entry in the concealed linear range. The next step up is 8.5x40, and the list continues through 8.5x50, 8.5x60, 8.5x70 and 8.5x80 to 8.5x90, with special sizes made on request for runs that fall outside those steps.

Jawdah's data sheet for stainless steel linear drains describes the family in 304 or 316 stainless steel with a polished finish, and lists gold, black, mirror and other finishes for some of its sizes. Treat these as range data. The sheet's own sizes run from 10x30 to 10x90, and none of them is matched to the 8.5-wide sizes on the product list, so no datasheet row is applied to this length.

In practice, the grade, finish, outlet and exact dimensions of an 8.5x30 unit are settled when Jawdah prepares the quotation, not read off a table.

Choose 8.5x30 when the drain only has to span a short edge, such as a compact shower bay. If the run is a little longer, compare it with 8.5x40 before ordering. None of the listed 8.5 sizes has its own datasheet row, so confirm the steel grade, finish, outlet connection and floor build-up with Jawdah for whichever length you pick.

Types

Sizes and variants

Other listed sizes of this product: 8.5x40, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Compact shower bays where the drain runs along a short back edge
  • Small en-suite bathrooms with a floor sloped toward one wall
  • Short thresholds at the entry of a walk-in shower
  • Ablution corners and wet niches that need only a short drain run

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x30: recorded data
PropertyValueSource
Size / model (product list)8.5x30Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x30 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x30)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. Among the standard sizes on Jawdah's product list, 8.5x30 is the shortest; the list continues to 8.5x90, and special sizes can be requested for other runs.

  • No. The datasheet lists 10-wide linear drains from 10x30 to 10x90 and does not cross-reference them to the 8.5 sizes, so the dimensions of 8.5x30 are confirmed with the quotation.

  • The linear drain datasheet describes the range in 304 or 316 stainless steel. The grade for an 8.5x30 order is confirmed by Jawdah with the quotation.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x30

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.