Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x60

Concealed Linear Floor Drain 8.5x60

Concealed Linear Floor Drain 8.5x60 is the middle size of Jawdah's concealed linear range: a stainless steel floor channel with a concealed cover.

Size
8.5x60

Overview

Quick answer

The 8.5x60 is a concealed-cover stainless steel linear floor drain at the exact centre of Jawdah's list, with three shorter and three longer standard sizes around it. The datasheet describes the wider family, 10x30 to 10x90, in 304 or 316 steel, so its figures are range data only and the 8.5x60 specification is confirmed by Jawdah.

Overview

About Concealed Linear Floor Drain 8.5x60

Sitting at the centre of the list, the 8.5x60 has three shorter siblings below it and three longer ones above. That makes it a natural reference point when a designer is still deciding how long the drain line should be. The product itself is a stainless steel linear drain with a concealed cover, from the same family as every other length in the range.

The concealed linear sizes on Jawdah's product list step from 8.5x30 to 8.5x90. Below 8.5x60 come 8.5x30, 8.5x40 and 8.5x50; above it come 8.5x70, 8.5x80 and 8.5x90. Special sizes can be requested when the run does not match any of them.

Finish is a question worth settling early. The datasheet gives polish as the standard finish and mentions gold, black, mirror and other colours for some of its sizes, but it does so for the 10-wide series. It does not say which of those finishes apply to the 8.5 sizes.

The same applies to material: 304 and 316 stainless steel are named for the range, and the grade for an 8.5x60 order is confirmed with the quotation together with outlet details and exact dimensions.

Use 8.5x60 as the starting point if you are unsure of the run, then move one step either way: 8.5x50 suits a shorter edge and 8.5x70 a longer one. Because the datasheet's sizes are 10 wide and not matched to this series, ask Jawdah to confirm grade, finish and outlet for the final length before tiling begins.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x70, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Mid-sized walk-in showers with the drain along the back wall
  • Accessible bathrooms designed with a level, single-fall floor
  • Hotel bathroom showers where the same drain line repeats across rooms
  • Wet corridors between a shower and a changing area

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x60: recorded data
PropertyValueSource
Size / model (product list)8.5x60Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x60 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x60)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. With 8.5x30, 8.5x40 and 8.5x50 below it and 8.5x70, 8.5x80 and 8.5x90 above it, 8.5x60 is the central size on Jawdah's product list.

  • The datasheet names polish and lists gold, black, mirror and other finishes for some sizes of its 10-wide series. Jawdah confirms which finish can be supplied for 8.5x60 with the quotation.

  • The material (304/316 stainless steel) and finish information are range data from the linear drain datasheet. Only the 8.5x60 size itself comes from Jawdah's product list.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x60

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.