Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x90

Concealed Linear Floor Drain 8.5x90

The 8.5x90 is the longest standard size of Jawdah's Concealed Linear Floor Drain, a stainless steel linear drain with a concealed cover.

Size
8.5x90

Overview

Quick answer

Concealed Linear Floor Drain 8.5x90 is the top of Jawdah's standard concealed linear list, used where a drain must span a long edge. Beyond it, Jawdah offers special sizes on request. The datasheet describes the family in 304/316 stainless steel for 10-wide sizes, so this drain's own specification is confirmed with the quotation.

Overview

About Concealed Linear Floor Drain 8.5x90

At the far end of the list, 8.5x90 is the size for the longest drain edges that a standard item can cover. Anything longer moves into Jawdah's special sizes, made on request. Below it sits 8.5x80, the obvious comparison when the measured run falls just short. As with the rest of the family, the channel is stainless steel and the cover is concealed.

Seven standard lengths make up the concealed linear range on Jawdah's product list, rising from 8.5x30 to this one, 8.5x90. Past this point the list does not continue in steps; instead it notes that special sizes are available upon request.

The linear drain datasheet supplies range data only. It names stainless steel 304/316, a polish finish, and gold, black, mirror and other finishes listed for some sizes, all for a series that runs 10x30 to 10x90. Even the top of that series is not tied to 8.5x90, so the two must not be treated as one item.

Jawdah confirms the grade, finish, outlet and exact dimensions of an 8.5x90 drain with the quotation. For a run longer than this size, share the measured edge and ask Jawdah about a special size.

8.5x90 suits the longest edges among the listed sizes. If your run is a little shorter, 8.5x80 may fit without reworking the tiling layout; if it is longer, a special size is the route. No 8.5 length has its own datasheet values, so confirm grade, finish and outlet with Jawdah for the size you settle on.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70 and 8.5x80. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Full-width shower walls in large bathrooms
  • Wet rooms with a single long drain edge
  • Wide terrace door thresholds where water is collected along the opening
  • Shower rows in sports facilities with a continuous drain line

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x90: recorded data
PropertyValueSource
Size / model (product list)8.5x90Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x90 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x90)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. 8.5x90 is the longest standard length on Jawdah's product list. Longer or non-standard runs are handled as special sizes on request.

  • Ask Jawdah for a special size. The product list notes that special sizes are available on request; send the measured run and outlet details with the enquiry.

  • No link is made. The datasheet's 10-wide series ends at 10x90 but is not matched to 8.5x90, so its data is read as range information only.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x90

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.