Stainless Steel Floor Drains · 8.5x50
Concealed Linear Floor Drain 8.5x50
The 8.5x50 is the third listed length of Jawdah's Concealed Linear Floor Drain, a stainless steel channel drain fitted with a concealed cover.
- Size
- 8.5x50
Overview
Quick answer
Concealed Linear Floor Drain 8.5x50 is a stainless steel linear drain whose cover is concealed, listed by Jawdah between 8.5x40 and 8.5x60. Range data from Jawdah's data sheet covers 304 and 316 stainless steel and a polished finish, but the sheet's sizes are 10 wide, so the actual specification of an 8.5x50 drain is set out in Jawdah's quotation.
Overview
About Concealed Linear Floor Drain 8.5x50
Three steps into the list, the 8.5x50 is where the concealed linear range moves from compact runs toward mid-length ones. Buyers usually reach it after measuring a drain edge that the two shorter sizes cannot span. This page sets out what is known about it, what belongs to the range rather than to this length, and what to ask for when ordering.
On Jawdah's product list the concealed linear drain comes as 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90, with special sizes made on request. The 8.5x50 shares the 8.5 designation with all of them and differs only in its length figure.
Material information is published at range level. Jawdah's data sheet for linear drains states stainless steel 304/316 and a polish finish, with gold, black, mirror and other options shown against some of its sizes. Those listed sizes run 10x30 to 10x90, a different width from this product, and the sheet does not link the two series.
For an 8.5x50 order, ask Jawdah to state the grade, finish, outlet type and overall dimensions in the quotation, and check them against the bathroom drawings before the screed is laid.
Think of 8.5x50 as the bridge between short and mid-length runs. Compare it with 8.5x40 if the space is tight and with 8.5x60 if the edge is longer. No 8.5 size has a dedicated datasheet entry, so the comparison is about length only; grade, finish and outlet are confirmed for whichever size you choose.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Shower enclosures where the drain runs along a mid-length side wall
- Bathrooms converted from a shower tray to a level floor with a one-way fall
- Covered terrace edges where a medium drain run is needed
- Changing areas of gyms or pools with a wet strip along one side
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 8.5x50 | Jawdah product list |
| Material (linear drain datasheet) | Stainless steel 304/316 | Datasheet |
| Finish (linear drain datasheet) | Polish; stain, gold, black or mirror listed for some sizes | Datasheet |
| Size cross-reference | Datasheet lists 10x30 to 10x90; not matched to 8.5 sizes | Datasheet |

Key facts
- Concealed Linear Floor Drain 8.5x50 is listed under Sanitary Ware & Drainage Solutions.
- Role: a linear stainless steel floor drain with a concealed cover.
- Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
- Range data: material (linear drain datasheet): Stainless steel 304/316.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (8.5x50)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It is the third of seven standard lengths on Jawdah's product list, after 8.5x30 and 8.5x40 and before 8.5x60, 8.5x70, 8.5x80 and 8.5x90.
Share the drain run length, the outlet or pipe it connects to, the floor build-up, and your preferred stainless steel grade and finish. Jawdah then confirms the specification for this size.
The linear drain datasheet lists 304 and 316 stainless steel for the range. Which grade applies to an 8.5x50 order is confirmed with the quotation.

Next step
Request a quotation for Concealed Linear Floor Drain 8.5x50
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

