Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x70

Concealed Linear Floor Drain 8.5x70

The 8.5x70 is a longer length of Jawdah's Concealed Linear Floor Drain, the stainless steel linear drain that carries a concealed cover.

Size
8.5x70

Overview

Quick answer

Concealed Linear Floor Drain 8.5x70 is the fifth standard length on Jawdah's list, aimed at drain runs longer than the middle size covers. It belongs to a stainless steel family that the datasheet describes in grades 304/316, though that sheet's sizes are 10 wide. Jawdah confirms the exact build of an 8.5x70 drain with the quotation.

Overview

About Concealed Linear Floor Drain 8.5x70

Once a drain edge passes the middle of the range, the 8.5x70 is the first of the longer options. It follows 8.5x60 and comes before 8.5x80 and 8.5x90 on Jawdah's product list. For a run of this kind, the outlet position and the floor build-up deserve as much attention as the length, and both are agreed with Jawdah for this size.

Jawdah offers the concealed linear drain in lengths from 8.5x30 up to 8.5x90 and makes special sizes on request. At 8.5x70, this item is the fifth of the seven listed steps, two short of the longest.

A longer channel collects water from a wider strip of floor, so planning tends to focus on where the outlet sits and how the screed falls toward it. These are general site considerations rather than published values for this drain, and Jawdah confirms the outlet arrangement of an 8.5x70 unit when it quotes.

The datasheet's contribution is range information: 304 or 316 stainless steel, a polish finish, and gold, black, mirror or other finishes for some sizes. Its sizes are 10x30 to 10x90 and they are not matched to the 8.5 series, so none of its rows is used as 8.5x70 data.

Pick 8.5x70 when 8.5x60 stops short of the edge and 8.5x80 would run past it. If the run is longer still, compare 8.5x90 or ask about a special size. Whatever the length, confirm with Jawdah the grade, finish, outlet and dimensions, because the datasheet gives no separate entry for any 8.5 size.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Large walk-in showers with a long drain line against one wall
  • Wet rooms where the floor falls toward a single edge
  • Balcony or terrace strips beside a door threshold
  • Pool-side shower areas with a longer collection edge

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x70: recorded data
PropertyValueSource
Size / model (product list)8.5x70Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x70 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x70)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • 8.5x60 is the next shorter size and 8.5x80 the next longer one. 8.5x90 is the longest standard length, and special sizes can be requested.

  • Jawdah's data does not publish an outlet arrangement for the 8.5 sizes. The outlet type and position for an 8.5x70 drain are confirmed with the quotation.

  • No. The datasheet lists 10-wide sizes from 10x30 to 10x90 and does not match them to this series. Treat its material and finish data as range information only.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x70

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.