Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x40

Concealed Linear Floor Drain 8.5x40

Concealed Linear Floor Drain 8.5x40 is the second length in Jawdah's concealed stainless steel linear drain list, one step above 8.5x30.

Size
8.5x40

Overview

Quick answer

The 8.5x40 is a stainless steel linear floor drain with a concealed cover, sitting one step above the shortest size on Jawdah's list. It suits runs a little longer than 8.5x30 allows. Material and finish information comes from range data for 304/316 linear drains; because that sheet lists 10-wide sizes, this length's own figures are confirmed by Jawdah with the quotation.

Overview

About Concealed Linear Floor Drain 8.5x40

A short shower that is just too long for the entry size often lands on 8.5x40. It is the second rung of the concealed linear list, with 8.5x30 below it and 8.5x50 above. Like every size in the family, it is a stainless steel channel with a concealed cover, so the tiling can carry on with only a slim line showing where water leaves the floor.

Jawdah's product list gives the concealed linear drain in seven standard lengths, from 8.5x30 through 8.5x90, plus special sizes on request. The 8.5x40 is the second of those, useful when the compact size leaves a gap but a mid-range length would overshoot the space.

What the datasheet adds is family-level information. It names 304 and 316 stainless steel, a polished finish as standard and further finishes, including gold, black and mirror, for some listed sizes. The sheet's sizes are 10 wide, running from 10x30 to 10x90, and none is matched to 8.5x40, so its rows are not this drain's own values.

Grade, finish, outlet position and overall dimensions for 8.5x40 are therefore agreed with Jawdah at quotation stage.

Measure the edge the drain will follow. If 8.5x30 falls short and 8.5x50 is more than the space needs, 8.5x40 is the listed size in between. If the run sits between two listed steps, ask about a special size. For any choice, confirm grade 304 or 316, the finish, the outlet connection and the floor build-up with Jawdah, since no 8.5 size has its own datasheet values.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Standard residential shower areas with a short back wall
  • Guest bathrooms where the floor falls toward one side
  • Shower thresholds slightly wider than the compact size covers
  • Laundry or utility corners with a short wet edge

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x40: recorded data
PropertyValueSource
Size / model (product list)8.5x40Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x40 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x40)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It sits between them on Jawdah's product list: one step longer than 8.5x30 and one step shorter than 8.5x50. The width designation, 8.5, is the same across the range.

  • The datasheet lists gold, black, mirror and other finishes for some linear drain sizes, with polish as the base finish. Whether a given finish applies to 8.5x40 is confirmed with the quotation.

  • That is not established. The datasheet lists 10x30 to 10x90 and does not match those sizes to the 8.5 widths, so Jawdah confirms the 8.5x40 details directly.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x40

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.