Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x80

Concealed Linear Floor Drain 8.5x80

Concealed Linear Floor Drain 8.5x80 is the second-longest standard size in Jawdah's list of stainless steel linear drains with a concealed cover.

Size
8.5x80

Overview

Quick answer

The 8.5x80 is a stainless steel linear floor drain with a concealed cover, one step below the longest length Jawdah lists. It covers long drain edges without moving to the top size or a special order. Range data names 304/316 stainless steel; the exact specification of 8.5x80 is confirmed by Jawdah with the quotation.

Overview

About Concealed Linear Floor Drain 8.5x80

Long shower walls and wet-room edges are where the 8.5x80 earns its place. Only 8.5x90 is longer among the standard sizes, and 8.5x70 sits just below. Choosing between these three is mostly a matter of measuring the edge carefully and checking how the tiles will meet the drain line before any order is placed.

Jawdah's product list sets out seven concealed linear lengths, 8.5x30 through 8.5x90, and accepts requests for special sizes. 8.5x80 is the sixth, which makes it a natural comparison point for anyone weighing the longest standard size against a slightly shorter one.

The datasheet behind the range describes linear drains in stainless steel 304/316, finished in polish as standard, and lists gold, black, mirror and other finishes for some sizes. It does so for a 10-wide series from 10x30 to 10x90 that it does not connect to the 8.5 sizes.

So the figures on that sheet describe the family, not this item. Grade, finish, outlet and dimensions for an 8.5x80 drain are confirmed when Jawdah prepares the quotation; on projects with many identical bathrooms, confirm them once and repeat the same reference across the order.

Choose 8.5x80 for long edges that 8.5x70 cannot cover but that do not need the full 8.5x90. If the run is longer than any standard step, a special size can be requested. Confirm the stainless steel grade, finish and outlet with Jawdah, since the datasheet has no separate figures for this or any other 8.5 length.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Long shower walls in villas and apartments
  • Wet rooms with a full-width drain line along one side
  • Repeated bathroom layouts in hotels or residential towers
  • Covered outdoor shower areas near pools or beaches

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Concealed Linear Floor Drain 8.5x80: recorded data
PropertyValueSource
Size / model (product list)8.5x80Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Concealed Linear Floor Drain 8.5x80 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a concealed cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x80)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No. 8.5x80 is the second-longest standard length; 8.5x90 is longer. Special sizes can also be requested from Jawdah.

  • Measure the edge the drain will follow and compare it with both listed sizes. Jawdah confirms the exact dimensions of each with the quotation, so share the measured run when asking.

  • The datasheet lists polish plus gold, black, mirror and other finishes for some of its 10-wide sizes. It does not state them for 8.5x80, so Jawdah confirms the finish with the quotation.

Next step

Request a quotation for Concealed Linear Floor Drain 8.5x80

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.