Stainless Steel Floor Drains · 8.5x30
Slotted Linear Floor Drain 8.5x30
Slotted Linear Floor Drain 8.5x30 is the shortest standard size of Jawdah's stainless steel linear drain with an open, slotted cover.
- Size
- 8.5x30
Overview
Quick answer
The 8.5x30 is the entry size of Jawdah's Slotted Linear Floor Drain: a stainless steel channel whose cover has open slots, so the drain line stays visible in the floor. The datasheet describes the family in 304/316 stainless steel, but for 10-wide sizes, so the build of this 8.5 size is confirmed with the quotation.
Overview
About Slotted Linear Floor Drain 8.5x30
With its slots on show, this drain makes no attempt to hide in the floor, and at 8.5x30 it does so over the shortest run in the range. It is meant for compact wet areas where a short, visible grate line is acceptable or even wanted. Longer versions follow in regular steps, ending at 8.5x90.
Jawdah lists the slotted linear drain as 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90, and also makes special sizes on request. 8.5x30 opens that list. The cover is slotted, meaning water passes through open slots in a visible grate rather than around a concealed panel.
Material and finish come from range data. Jawdah's data sheet for linear drains gives stainless steel 304/316 and a polish finish, and shows gold, black, mirror and other finishes for some sizes. That sheet, however, covers sizes 10x30 to 10x90, and it does not equate any of them with the 8.5 widths sold under this name.
Anything specific to an 8.5x30 slotted unit, including its grade, finish, outlet and exact dimensions, is therefore confirmed by Jawdah with the quotation.
Start with 8.5x30 for the shortest edges, such as a small shower corner. If the measured run is longer, step up to 8.5x40. Since the datasheet holds no values for any 8.5 size, ask Jawdah to confirm the grade, the finish, the outlet and how the drain sits in your floor build-up before you finalise.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Small shower corners where a short visible grate is acceptable
- Ablution areas with a compact drain edge
- Short utility or laundry floor edges that are hosed down
- Narrow balcony strips with a short collection line
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 8.5x30 | Jawdah product list |
| Material (linear drain datasheet) | Stainless steel 304/316 | Datasheet |
| Finish (linear drain datasheet) | Polish; stain, gold, black or mirror listed for some sizes | Datasheet |
| Size cross-reference | Datasheet lists 10x30 to 10x90; not matched to 8.5 sizes | Datasheet |

Key facts
- Slotted Linear Floor Drain 8.5x30 is listed under Sanitary Ware & Drainage Solutions.
- Role: a linear stainless steel floor drain with a slotted cover.
- Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
- Range data: material (linear drain datasheet): Stainless steel 304/316.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (8.5x30)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
8.5x30 is the smallest standard size on Jawdah's product list for this drain. Larger steps run up to 8.5x90, and special sizes can be requested.
The slotted cover has open slots that leave the grate visible in the floor. Grade and finish of that cover for 8.5x30 are confirmed with the quotation.
Not for this size. The linear drain datasheet lists 10x30 to 10x90 and does not match them to 8.5 widths, so Jawdah confirms dimensions on request.

Next step
Request a quotation for Slotted Linear Floor Drain 8.5x30
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

