Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x80

Slotted Linear Floor Drain 8.5x80

Slotted Linear Floor Drain 8.5x80 is the second-longest standard size in Jawdah's range of stainless steel linear drains with a slotted cover.

Size
8.5x80

Overview

Quick answer

The 8.5x80 is a stainless steel linear floor drain with an open slotted grate, listed just below the longest 8.5x90. It suits long drain edges in showers, wet rooms and service areas. The datasheet's 304/316 and finish data applies to a 10-wide series, so Jawdah confirms the grade, finish and dimensions of 8.5x80 with the quotation.

Overview

About Slotted Linear Floor Drain 8.5x80

In larger wet rooms and commercial washrooms, a long visible grate is often the practical choice, and the 8.5x80 is the second-longest slotted size Jawdah lists. Only 8.5x90 goes further. When the drain will be repeated across many rooms of a project, settling this one size precisely saves revisiting the detail later.

Jawdah's product list gives seven slotted lengths, 8.5x30 through 8.5x90, and special sizes on request. 8.5x80 is the sixth, sitting between 8.5x70 and the top size.

Range data comes from Jawdah's data sheet for linear drains. It records stainless steel 304/316, a polish finish as standard, and gold, black, mirror and other finishes for some sizes. The datasheet's own list runs from 10x30 to 10x90, and none of those entries is matched to the 8.5 series.

For that reason, this page gives no datasheet values as 8.5x80 data. Ask Jawdah to state grade, finish, outlet and dimensions in the quotation, and use that confirmed reference consistently on multi-room projects.

Choose 8.5x80 for edges that need more than 8.5x70 but less than 8.5x90. For runs beyond the standard list, Jawdah makes special sizes on request. Confirm the grade, the finish of the visible grate and the outlet with Jawdah, because no 8.5 size carries its own datasheet values.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Commercial washrooms with long shower rows
  • Large wet rooms in hotels or hospitals with a single drain edge
  • Service areas and loading-bay thresholds that are washed down
  • Long outdoor shower strips beside pools

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Slotted Linear Floor Drain 8.5x80: recorded data
PropertyValueSource
Size / model (product list)8.5x80Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Slotted Linear Floor Drain 8.5x80 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a slotted cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x80)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Only the length designation on Jawdah's product list: 8.5x80 is one step shorter than 8.5x90. Exact dimensions of both are confirmed with the quotation.

  • Yes, it can be specified for multi-room projects. Confirm grade, finish and outlet once with Jawdah and repeat the same confirmed specification across the order.

  • No. The datasheet lists 10-wide sizes from 10x30 to 10x90 and does not match them to 8.5x80, so its information is range data.

Next step

Request a quotation for Slotted Linear Floor Drain 8.5x80

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.