Stainless Steel Floor Drains · 8.5x60
Slotted Linear Floor Drain 8.5x60
Slotted Linear Floor Drain 8.5x60 is the central standard size of Jawdah's stainless steel linear drain with an open slotted cover.
- Size
- 8.5x60
Overview
Quick answer
The 8.5x60 slotted drain is the fourth of seven standard lengths, with 8.5x30, 8.5x40 and 8.5x50 below and 8.5x70, 8.5x80 and 8.5x90 above. It is a stainless steel channel with a visible slotted grate. Datasheet information on 304/316 steel and finishes relates to a 10-wide series, so Jawdah confirms this size's specification.
Overview
About Slotted Linear Floor Drain 8.5x60
When a project needs one slotted drain size to test against a floor layout, 8.5x60 is a sensible reference: it sits at the exact centre of the list. From here a designer can move one step shorter or longer as the measured edge demands. The open grate stays in view, so its line becomes part of the tiled pattern.
The seven standard slotted lengths on Jawdah's product list run from 8.5x30 to 8.5x90, with special sizes made on request. 8.5x60 is the fourth, equally spaced from both ends of the range.
The visible grate means the cover's finish matters to the look of the floor. The datasheet lists polish as the standard finish and names gold, black, mirror and other finishes for some sizes; it gives the material as stainless steel 304/316. All of that is range data, recorded against sizes 10x30 to 10x90.
Because the datasheet sizes are not matched to the 8.5 series, nothing in it is presented as 8.5x60's own value. Jawdah confirms grade, finish, outlet and exact dimensions with the quotation.
Use 8.5x60 as the middle reference, then adjust: 8.5x50 for a shorter edge, 8.5x70 for a longer one. If the finish of the visible grate is important to the design, raise it early, since finishes are only listed for some datasheet sizes and Jawdah must confirm what applies to this length.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Walk-in showers where the grate line is part of the tile layout
- Hotel and serviced-apartment bathrooms with a repeated shower detail
- Changing-room wet zones with a visible drain strip
- Wash-down areas in light commercial premises
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 8.5x60 | Jawdah product list |
| Material (linear drain datasheet) | Stainless steel 304/316 | Datasheet |
| Finish (linear drain datasheet) | Polish; stain, gold, black or mirror listed for some sizes | Datasheet |
| Size cross-reference | Datasheet lists 10x30 to 10x90; not matched to 8.5 sizes | Datasheet |

Key facts
- Slotted Linear Floor Drain 8.5x60 is listed under Sanitary Ware & Drainage Solutions.
- Role: a linear stainless steel floor drain with a slotted cover.
- Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
- Range data: material (linear drain datasheet): Stainless steel 304/316.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (8.5x60)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It is the middle of the seven standard slotted lengths on Jawdah's product list, so one step either way covers 8.5x50 and 8.5x70.
The datasheet lists gold, black, mirror and other finishes for some sizes of its 10-wide range. Whether one applies to 8.5x60 is confirmed with the quotation.
The datasheet lists 10x30 to 10x90. Those sizes are not matched to 8.5x60, so they serve as range information only.

Next step
Request a quotation for Slotted Linear Floor Drain 8.5x60
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

