Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x90

Slotted Linear Floor Drain 8.5x90

The 8.5x90 is the longest standard size of Jawdah's Slotted Linear Floor Drain, a stainless steel linear drain with a visible slotted cover.

Size
8.5x90

Overview

Quick answer

Slotted Linear Floor Drain 8.5x90 closes Jawdah's list of standard slotted lengths, for the longest drain edges a catalogue size covers. Longer runs are handled as special sizes on request. The datasheet gives 304/316 stainless steel and polish finish as range data for 10-wide sizes, so the 8.5x90 specification is confirmed with the quotation.

Overview

About Slotted Linear Floor Drain 8.5x90

The 8.5x90 is where the standard slotted list ends. It is meant for long, visible drain lines such as full-width shower walls or wide thresholds, and if even this is not enough, Jawdah makes special sizes on request. 8.5x80 sits one step below and is the size to compare when the measured edge falls a little short.

Jawdah's product list runs the slotted linear drain from 8.5x30 through 8.5x90, then notes that special sizes are available upon request. 8.5x90 is the seventh and last standard step.

Its open slotted grate stays visible along the whole run, so the finish is part of the floor's look. Range data from the datasheet lists polish as standard and gold, black, mirror and other finishes for some sizes, with stainless steel 304/316 as the material.

The datasheet's sizes, 10x30 to 10x90, are a different width and are not matched to this series. Its top entry should not be read as the data for 8.5x90. Jawdah confirms grade, finish, outlet and dimensions with the quotation.

8.5x90 covers the longest edges in the standard slotted list. If the measured run is slightly shorter, 8.5x80 may suit; if it is longer, request a special size. None of the 8.5 sizes has its own datasheet values, so confirm grade, finish and outlet for the length you choose.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70 and 8.5x80. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Full-width shower walls in large residential bathrooms
  • Wide terrace and balcony thresholds with a visible grate line
  • Long wet-area edges in sports centres and hotel spas
  • Wash-down floors in service areas with one long drain edge

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Slotted Linear Floor Drain 8.5x90: recorded data
PropertyValueSource
Size / model (product list)8.5x90Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Slotted Linear Floor Drain 8.5x90 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a slotted cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x90)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Not as a standard size. 8.5x90 is the longest standard length on Jawdah's product list; longer runs are made as special sizes on request.

  • Yes. The slotted cover is an open grate that remains visible in the floor. The finish for 8.5x90 is confirmed with the quotation.

  • No. The datasheet lists 10-wide sizes up to 10x90 and does not match them to 8.5x90, so its data is range information only.

Next step

Request a quotation for Slotted Linear Floor Drain 8.5x90

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.