Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x70

Slotted Linear Floor Drain 8.5x70

The 8.5x70 is one of the longer sizes of Jawdah's Slotted Linear Floor Drain, a stainless steel linear drain with an open slotted grate.

Size
8.5x70

Overview

Quick answer

Slotted Linear Floor Drain 8.5x70 is the fifth standard length Jawdah lists for this stainless steel drain with a visible slotted cover. It covers runs beyond the middle size. Range data from the datasheet names 304/316 stainless steel and a polish finish, but for 10-wide sizes, so the 8.5x70 specification is confirmed with the quotation.

Overview

About Slotted Linear Floor Drain 8.5x70

Terraces, long showers and service corridors tend to need a drain line that reaches further than the middle of the range, and the 8.5x70 slotted drain answers that. It follows 8.5x60 and is followed by 8.5x80 and 8.5x90. On an open grate of this length, how the outlet connects and how the floor falls are the points to settle.

Seven slotted lengths appear on Jawdah's product list, 8.5x30 to 8.5x90, and special sizes can be ordered on request. 8.5x70 is the fifth, the first of the three longer standard options.

Longer runs usually call for careful falls in the floor screed toward the outlet. That is general site practice, not a published value for this drain; Jawdah does not list an outlet arrangement for the 8.5 sizes and confirms it for 8.5x70 with the quotation.

For material and finish, the datasheet supplies family data: stainless steel 304/316, a polish finish, and gold, black, mirror or other finishes for some sizes. Its listed sizes run 10x30 to 10x90 and are not linked to the 8.5 widths.

Choose 8.5x70 when the measured edge is longer than 8.5x60 covers and shorter than 8.5x80. For still longer runs, compare 8.5x90 or ask about a special size. Since no 8.5 length has its own datasheet row, confirm grade, finish, outlet and dimensions with Jawdah for this size.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Terraces where a visible grate collects water along a door line
  • Long showers in villas with a single-direction floor fall
  • Service corridors and plant-room floors that are washed down
  • Pool-deck edges where an open slotted line is acceptable

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Slotted Linear Floor Drain 8.5x70: recorded data
PropertyValueSource
Size / model (product list)8.5x70Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Slotted Linear Floor Drain 8.5x70 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a slotted cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x70)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. It is the fifth of seven standard slotted lengths on Jawdah's product list; only 8.5x80 and 8.5x90 are longer.

  • Jawdah does not publish an outlet arrangement for the 8.5 sizes. Outlet type and position for 8.5x70 are confirmed with the quotation.

  • The datasheet lists 304/316 stainless steel for the linear drain range. The grade supplied for 8.5x70 is confirmed by Jawdah.

Next step

Request a quotation for Slotted Linear Floor Drain 8.5x70

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.