Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x50

Slotted Linear Floor Drain 8.5x50

This page covers the 8.5x50 size of Jawdah's Slotted Linear Floor Drain, a stainless steel linear drain whose slotted cover remains visible.

Size
8.5x50

Overview

Quick answer

Slotted Linear Floor Drain 8.5x50 is a stainless steel channel drain with an open slotted cover, listed third of seven standard lengths. It bridges the short sizes and the middle of the range. Jawdah's linear drain datasheet supplies range data (304/316 stainless steel, polish finish) for 10-wide sizes only, so this size is specified with the quotation.

Overview

About Slotted Linear Floor Drain 8.5x50

A slotted drain of moderate length often suits floors that see heavy use and frequent washing, and the 8.5x50 is the first slotted size that reaches beyond the short end of the list. It is listed between 8.5x40 and 8.5x60. What sets it apart from them is length alone; construction, material and cover type are shared across the family.

Jawdah lists the slotted linear drain in 8.5x30, 8.5x40, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90, and makes special sizes on request. With two sizes below it and four above, 8.5x50 sits in the lower half of the range.

The slotted cover is the visible part of the drain: water passes through open slots, and the grate line stays readable in the finished floor. The datasheet places the linear drain family in stainless steel 304/316 with a polish finish, and some of its sizes are offered in gold, black, mirror and other finishes.

That datasheet covers 10x30 to 10x90 and does not cross-reference the 8.5 series, so none of its rows is treated as 8.5x50 data. Grade, finish, outlet and dimensions are confirmed by Jawdah with the quotation.

Pick 8.5x50 when 8.5x40 is too short and 8.5x60 is more than needed. All seven slotted sizes share the same range data and none has its own datasheet row, so the choice rests on measured length. Confirm grade, finish and outlet with Jawdah once the length is fixed.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x40, 8.5x60, 8.5x70, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Gym and club showers where floors are washed often
  • Shower areas in staff accommodation and dormitories
  • Service corridors with a visible drain line across the floor
  • Covered terrace edges collecting runoff over a moderate length

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Slotted Linear Floor Drain 8.5x50: recorded data
PropertyValueSource
Size / model (product list)8.5x50Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Slotted Linear Floor Drain 8.5x50 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a slotted cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x50)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Two: 8.5x30 and 8.5x40. Four standard sizes are longer, up to 8.5x90, and special sizes can be requested from Jawdah.

  • Yes. A slotted cover is an open grate that stays visible in the floor. Its finish for 8.5x50 is confirmed with the quotation.

  • The datasheet lists 10-wide sizes from 10x30 to 10x90 and does not match them to the 8.5 series, so its material and finish information is range data.

Next step

Request a quotation for Slotted Linear Floor Drain 8.5x50

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.