Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 8.5x40

Slotted Linear Floor Drain 8.5x40

The 8.5x40 is the second standard length of Jawdah's Slotted Linear Floor Drain, a stainless steel channel finished with a visible slotted cover.

Size
8.5x40

Overview

Quick answer

Slotted Linear Floor Drain 8.5x40 is a stainless steel linear drain with an open slotted grate, one step longer than the entry size. Jawdah's data sheet gives 304/316 stainless steel and a polish finish for the linear drain family, but its sizes are 10 wide. The exact 8.5x40 specification is therefore confirmed by Jawdah when it quotes.

Overview

About Slotted Linear Floor Drain 8.5x40

For a typical shower that is slightly longer than a compact bay, the 8.5x40 slotted drain is the next size to check. Its open grate sits in plain view, which many owners prefer because the slots are easy to see and wipe. Below it is 8.5x30, above it 8.5x50, and the full list reaches 8.5x90.

The slotted linear drain appears on Jawdah's product list in seven standard lengths from 8.5x30 to 8.5x90, with special sizes on request. 8.5x40 is the second of the seven, so it fills the gap between the shortest unit and the lower-middle 8.5x50.

All linear drains in the datasheet are described in stainless steel 304/316 with a polish finish, and some of its sizes are also shown in gold, black, mirror and other finishes. These details belong to the range. The sheet itself lists 10x30 to 10x90, a different width, and makes no link to 8.5x40.

In short, the size comes from Jawdah's product list and everything else is confirmed for this length with the quotation: grade, finish, outlet arrangement and exact dimensions.

Compare 8.5x40 with its two neighbours. Choose 8.5x30 if the edge is shorter, or 8.5x50 if the grate needs to reach further. Because none of the 8.5 sizes has datasheet values of its own, ask Jawdah to confirm grade and finish, and check the outlet against your drainage pipe before ordering.

Types

Sizes and variants

Other listed sizes of this product: 8.5x30, 8.5x50, 8.5x60, 8.5x70, 8.5x80 and 8.5x90. Special sizes are available upon request.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Family bathrooms where a visible shower grate is easy to clean
  • Shower areas with a short back wall and a one-way floor fall
  • Entry thresholds to wet areas in villas
  • Small service rooms that are washed down regularly

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Slotted Linear Floor Drain 8.5x40: recorded data
PropertyValueSource
Size / model (product list)8.5x40Jawdah product list
Material (linear drain datasheet)Stainless steel 304/316Datasheet
Finish (linear drain datasheet)Polish; stain, gold, black or mirror listed for some sizesDatasheet
Size cross-referenceDatasheet lists 10x30 to 10x90; not matched to 8.5 sizesDatasheet

Key facts

  1. Slotted Linear Floor Drain 8.5x40 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a linear stainless steel floor drain with a slotted cover.
  3. Datasheet values here are range-level: the datasheet does not name this size or model, so its own values are confirmed by Jawdah.
  4. Range data: material (linear drain datasheet): Stainless steel 304/316.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (8.5x40)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • On Jawdah's product list, 8.5x30 is the shorter neighbour and 8.5x50 the longer one. The range continues to 8.5x90.

  • Only at range level. The datasheet gives polish and lists gold, black, mirror and other finishes for some 10-wide sizes; the 8.5x40 finish is confirmed with the quotation.

  • The linear drain range is described in 304/316 stainless steel. Jawdah states the grade for an 8.5x40 order in the quotation.

Next step

Request a quotation for Slotted Linear Floor Drain 8.5x40

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.