Sinks · 50x100
Double Bowl Stainless Steel Sink 50x100
The 50x100 is a mid-length double bowl stainless steel sink in Jawdah's 50 cm width range, with three listed sheet thicknesses.
- Size
- 50x100
- Listed in sink table as
- 100X50 (50 cm width range)
- Hole size
- 1.5”
- SS thickness
- 0.35 / 0.4 / 0.5 mm
Overview
Quick answer
Double Bowl Stainless Steel Sink 50x100 is a two-bowl stainless kitchen sink shown as 100X50 in Jawdah's sink table. In the 50 cm width range, it lists a 1.5-inch hole, a bowl position entry of 'All', and sheet thicknesses of 0.35, 0.4 and 0.5 mm. Material is given for the range: deep-drawing stainless steel 304 and 201.
Overview
About Double Bowl Stainless Steel Sink 50x100
A standard 100 length with two bowls is the most familiar double sink format for many kitchens, and the 50x100 is Jawdah's version in the 50 cm width. It is also the longest double bowl model in that width that still offers more than one thickness. The rest of its listed data matches the compact 50x80, with more counter left beside the bowls.
The sink table lists this model as 100X50. It is the third double bowl size in the 50 cm group, after 50x80 and 50x90, and before the 50x120 and 50x150.
Verified rows give a 1.5-inch outlet hole, a bowl position recorded as 'All', and sheet of 0.35, 0.4 or 0.5 mm. The 50x80 carries identical entries in a shorter body. The 50x120 above it narrows the choice to 0.5 mm and a right or left bowl position.
Jawdah also lists a 60x100 double bowl sink at the same length in the wider group, with a larger hole and grade-linked thickness. The grade for this 50x100 unit comes from the range data, 304 or 201, and is confirmed with the quotation.
Choose the 50x100 for a standard-length double sink on a 50 cm counter when you want to pick the sheet thickness. If your counter is 60 cm deep, compare the 60x100. If you need a fixed side layout, the 50x120 lists right or left. Confirm the bowl arrangement and grade with Jawdah.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Family kitchens that wash and rinse dishes in separate bowls
- Villa and apartment projects using a standard 100 sink length
- Office kitchens with regular washing-up after meals
- Majlis service kitchens where serving items are cleaned between guests
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 50x100 | Jawdah product list |
| Listed in sink table as | 100X50 (50 cm width range) | Jawdah product data |
| Hole size | 1.5” | Jawdah product data |
| SS thickness | 0.35 / 0.4 / 0.5 mm | Jawdah product data |
| Bowl position | All | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Double Bowl Stainless Steel Sink 50x100 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with two bowls.
- Recorded for this size: listed in sink table as: 100X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.35 / 0.4 / 0.5 mm; bowl position: All.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (50x100)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The 50x100 is in the 50 cm width range with a 1.5-inch hole and three thickness options. The 60x100 is in the 60 cm range with a larger hole and thickness linked to grade.
All of its verified rows: a 1.5-inch hole, the bowl position 'All' and thicknesses of 0.35, 0.4 and 0.5 mm. Only the length differs.
The sink table lists 0.35 mm among the options for this model, along with 0.4 and 0.5 mm. Jawdah confirms the thickness and grade with your quotation.

Next step
Request a quotation for Double Bowl Stainless Steel Sink 50x100
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

