Sinks · 50x80
Double Bowl Stainless Steel Sink 50x80
The 50x80 is the smallest double bowl stainless steel sink in Jawdah's product list, fitting two bowls into an 80X50 unit.
- Size
- 50x80
- Listed in sink table as
- 80X50 (50 cm width range)
- Hole size
- 1.5”
- SS thickness
- 0.35 / 0.4 / 0.5 mm
Overview
Quick answer
Double Bowl Stainless Steel Sink 50x80 is a two-bowl stainless sink from the 50 cm width range, listed as 80X50 in Jawdah's sink table. It has a 1.5-inch hole, its bowl position is recorded as 'All', and its sheet is offered at 0.35, 0.4 or 0.5 mm. The sink range is deep-drawing stainless steel 304 and 201.
Overview
About Double Bowl Stainless Steel Sink 50x80
Two bowls in the shortest length Jawdah offers: that is the case for the 50x80. It lets a small kitchen keep washing and rinsing apart without giving up much counter. The sink table puts it in the 50 cm width range with a 1.5-inch hole, a bowl position marked 'All', and a choice of three sheet thicknesses.
Jawdah lists eight double bowl sizes, from 50x80 up to 60x150. This one starts the list and is recorded in the sink table as 80X50, with 50x90 as the next size up.
Its hole size is 1.5 inches, shared with the other 50 cm width models. The bowl position row reads 'All', the same entry given to the 50x100 and 60x100; the table does not break that down further, so confirm the arrangement you want with the quotation. Sheet thickness is listed as 0.35, 0.4 or 0.5 mm.
The material row applies to the whole sink range rather than this size: deep-drawing stainless steel, grades 304 and 201. Name the grade and thickness you need when you contact Jawdah.
Choose the 50x80 when a double bowl is needed in the least length. If you have a little more room, the 50x90 lists a centred position at 0.5 mm, and the 50x100 matches this model's rows in a longer unit. If a single bowl would do, the single bowl 50x80 is the same footprint. Confirm the bowl arrangement with Jawdah.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Apartment kitchens that want separate washing and rinsing bowls in a short run
- Office pantries where cups and dishes are washed and rinsed separately
- Small staff kitchens in shops and clinics
- Replacement of an older compact two-bowl sink
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 50x80 | Jawdah product list |
| Listed in sink table as | 80X50 (50 cm width range) | Jawdah product data |
| Hole size | 1.5” | Jawdah product data |
| SS thickness | 0.35 / 0.4 / 0.5 mm | Jawdah product data |
| Bowl position | All | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Double Bowl Stainless Steel Sink 50x80 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with two bowls.
- Recorded for this size: listed in sink table as: 80X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.35 / 0.4 / 0.5 mm; bowl position: All.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (50x80)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. Jawdah's double bowl sizes run from 50x80 to 60x150, and the 50x80 is the most compact.
It is the entry in Jawdah's sink table for this model. The table does not detail the layouts behind it, so state the arrangement you want and Jawdah confirms it with the quotation.
0.35, 0.4 and 0.5 mm. The grade, 304 or 201 from the range data, is confirmed with the quotation.

Next step
Request a quotation for Double Bowl Stainless Steel Sink 50x80
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

