Jawdah Industrial Co. Ltd.

Sinks · 60x100

Double Bowl Stainless Steel Sink 60x100

The 60x100 is the shortest double bowl stainless steel sink in Jawdah's 60 cm width range and the only one in that width with the bowl position entry 'All'.

Size
60x100
Listed in sink table as
100X60 (60 cm width range)
Hole size
3”
Bowl position
All

Overview

Quick answer

Double Bowl Stainless Steel Sink 60x100 is a two-bowl stainless sink recorded as 100X60 in Jawdah's sink table. It opens the 60 cm width range with a 3-inch hole and a bowl position listed as 'All'. Sheet thickness follows grade: 0.5 mm in grade 201 or 0.6 mm in grade 304.

Overview

About Double Bowl Stainless Steel Sink 60x100

Moving to a 60 cm counter, Jawdah's double bowl list starts at the 60x100. It carries the larger 3-inch hole of the wider group, links sheet thickness to grade, and keeps the open bowl position entry 'All' that the 50 cm models 50x80 and 50x100 also have. In its own width, the 60x120 and 60x150 that follow record fixed positions instead.

In the sink table this model appears as 100X60, first of three double bowl sizes in the 60 cm width group; the others are 60x120 and 60x150. There is no 60 cm double bowl shorter than this one.

Its rows: hole size 3 inches; bowl position 'All'; stainless thickness 0.5 mm for grade 201 or 0.6 mm for grade 304. The table does not spell out which layouts 'All' covers, so describe the arrangement you need and Jawdah confirms it.

The 50x100 double bowl has the same length in the 50 cm group. It shares the 'All' entry but lists a smaller hole and thickness options that are not tied to a grade. Counter depth and the outlet on site are the deciding points between them.

Choose the 60x100 for a double bowl on a 60 cm counter where length is limited. If you need the bowls at one end, the 60x120 lists right or left; for a centred layout on a long run, see the 60x150. On a 50 cm counter, compare the 50x100. Specify grade 201 or 304 when you enquire.

Types

Sizes and variants

Other listed sizes of this product: 50x80, 50x90, 50x100, 50x120, 50x150, 60x120 and 60x150.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Family kitchens with 60 cm counters that wash and rinse separately
  • Villa kitchens fitted with a 3-inch waste connection
  • Office and clinic kitchens with standard counter lengths
  • Kitchen refits replacing a 100 length double sink on a deeper counter

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Double Bowl Stainless Steel Sink 60x100: recorded data
PropertyValueSource
Size / model (product list)60x100Jawdah product list
Listed in sink table as100X60 (60 cm width range)Jawdah product data
Hole size3”Jawdah product data
SS thickness0.5 mm (grade 201) / 0.6 mm (grade 304)Jawdah product data
Bowl positionAllJawdah product data
Material (sink range)Deep-drawing stainless steel 304 and 201Jawdah product data

Key facts

  1. Double Bowl Stainless Steel Sink 60x100 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel kitchen sink with two bowls.
  3. Recorded for this size: listed in sink table as: 100X60 (60 cm width range); hole size: 3”; ss thickness: 0.5 mm (grade 201) / 0.6 mm (grade 304); bowl position: All.
  4. Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (60x100)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The 60x100. The other 60 cm double bowl sizes in Jawdah's list are 60x120 and 60x150.

  • By grade. The sink table pairs 0.5 mm with grade 201 and 0.6 mm with grade 304 for this model.

  • A 3-inch hole, as listed in Jawdah's sink table. Check that your waste connection suits it before ordering.

Next step

Request a quotation for Double Bowl Stainless Steel Sink 60x100

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.