Jawdah Industrial Co. Ltd.

Sinks · 60x150

Double Bowl Stainless Steel Sink 60x150

The 60x150 is the largest double bowl stainless steel sink in Jawdah's product list, with a centre bowl position on a 60 cm wide unit.

Size
60x150
Listed in sink table as
150X60 (60 cm width range)
Hole size
3”
Bowl position
Centre

Overview

Quick answer

Double Bowl Stainless Steel Sink 60x150 is the biggest two-bowl sink Jawdah lists, recorded as 150X60 in the sink table. It has a centre bowl position, a 3-inch hole and stainless sheet of 0.5 mm in grade 201 or 0.6 mm in grade 304. The range material is deep-drawing stainless steel.

Overview

About Double Bowl Stainless Steel Sink 60x150

At the top of Jawdah's double bowl list sits the 60x150, the longest and widest two-bowl unit on offer. The bowls are recorded in the centre position, so counter remains on both sides. Like the other 60 cm models it uses a 3-inch hole, and its thickness is set by grade: 0.5 mm for 201, 0.6 mm for 304.

Recorded as 150X60, this is the last entry in the 60 cm double bowl group and the largest of the eight double bowl sizes, which start at 50x80. The 50x150 shares its length in the narrower group.

Its rows are a centre bowl position, a 3-inch hole and grade-linked thickness. Compared with the 60x120, the position changes from right or left to centre; compared with the 50x150, which is also centred, the hole is larger and the thickness is tied to a named grade.

Because of its size, check the counter support, cabinet layout below and delivery access before ordering. Jawdah confirms the grade and cut-out for the 60x150 with your quotation.

Choose the 60x150 for a centred double sink on a long 60 cm counter. If the bowls should sit at one end, the 60x120 lists right or left. On a 50 cm counter of the same length, the 50x150 is the alternative with a smaller hole. Specify grade 201 or 304 to fix the thickness.

Types

Sizes and variants

Other listed sizes of this product: 50x80, 50x90, 50x100, 50x120, 50x150, 60x100 and 60x120.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Large villa kitchens with a long, deep counter and a central sink
  • Community, mosque and event hall kitchens that wash in volume
  • Staff canteens and back-of-house areas in hotels
  • Preparation rooms where one bowl washes and the other rinses large items

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Double Bowl Stainless Steel Sink 60x150: recorded data
PropertyValueSource
Size / model (product list)60x150Jawdah product list
Listed in sink table as150X60 (60 cm width range)Jawdah product data
Hole size3”Jawdah product data
SS thickness0.5 mm (grade 201) / 0.6 mm (grade 304)Jawdah product data
Bowl positionCentreJawdah product data
Material (sink range)Deep-drawing stainless steel 304 and 201Jawdah product data

Key facts

  1. Double Bowl Stainless Steel Sink 60x150 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel kitchen sink with two bowls.
  3. Recorded for this size: listed in sink table as: 150X60 (60 cm width range); hole size: 3”; ss thickness: 0.5 mm (grade 201) / 0.6 mm (grade 304); bowl position: Centre.
  4. Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (60x150)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. Jawdah's double bowl sizes run from 50x80 to 60x150, and this page covers the largest.

  • The sink table records a centre position for this model, unlike the 60x120, which lists right or left.

  • 0.5 mm. The sink table pairs grade 201 with 0.5 mm and grade 304 with 0.6 mm for this model.

Next step

Request a quotation for Double Bowl Stainless Steel Sink 60x150

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.