Jawdah Industrial Co. Ltd.

Sinks · 50x90

Double Bowl Stainless Steel Sink 50x90

The 50x90 is a double bowl stainless steel sink unique to Jawdah's double bowl list, sitting between the 50x80 and 50x100 with a centre bowl position.

Size
50x90
Listed in sink table as
90X50 (50 cm width range)
Hole size
1.5”
SS thickness
0.5 mm

Overview

Quick answer

Double Bowl Stainless Steel Sink 50x90 is a two-bowl sink recorded as 90X50 in the 50 cm width range of Jawdah's sink table. It lists a centre bowl position, a 1.5-inch hole and a single sheet thickness of 0.5 mm. The material for the sink range is deep-drawing stainless steel 304 and 201.

Overview

About Double Bowl Stainless Steel Sink 50x90

There is no 90 length among Jawdah's single bowl sinks; it appears only in the double bowl list, as the 50x90. It is a step longer than the 50x80 and records a centre bowl position with one sheet thickness, 0.5 mm. For a buyer who wants a fixed, central layout rather than the open 'All' entry of its neighbours, it is a useful in-between size.

The sink table shows this model as 90X50, the second of five double bowl sizes in the 50 cm width range. Both neighbours, the 50x80 and the 50x100, record the bowl position as 'All', so the 50x90 is the first double bowl size with a centre entry.

Its outlet hole is 1.5 inches. Thickness is listed as 0.5 mm only, whereas the neighbours on either side offer a wider choice of thicknesses. If you need thinner sheet, one of those sizes may suit better.

Material information covers the sink range, deep-drawing stainless steel 304 and 201, and is not stated for this size alone. Jawdah confirms the grade and the layout with your quotation.

Choose the 50x90 when a 50 cm counter has slightly more room than the 50x80 needs and you want a centred layout. If you want the open bowl-position entry and a choice of thickness, compare the 50x80 or 50x100. Confirm the grade and cut-out with Jawdah before ordering.

Types

Sizes and variants

Other listed sizes of this product: 50x80, 50x100, 50x120, 50x150, 60x100, 60x120 and 60x150.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Kitchens where a symmetrical two-bowl layout under a window is wanted
  • Apartment refits with a counter slightly longer than a compact sink needs
  • Office pantries that separate washing from rinsing
  • Staff kitchens in schools and small offices

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Double Bowl Stainless Steel Sink 50x90: recorded data
PropertyValueSource
Size / model (product list)50x90Jawdah product list
Listed in sink table as90X50 (50 cm width range)Jawdah product data
Hole size1.5”Jawdah product data
SS thickness0.5 mmJawdah product data
Bowl positionCentreJawdah product data
Material (sink range)Deep-drawing stainless steel 304 and 201Jawdah product data

Key facts

  1. Double Bowl Stainless Steel Sink 50x90 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel kitchen sink with two bowls.
  3. Recorded for this size: listed in sink table as: 90X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.5 mm; bowl position: Centre.
  4. Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (50x90)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No. In Jawdah's product list the 90 length appears only in the double bowl range, as the 50x90.

  • The sink table records 0.5 mm for this model. Whether it is made in grade 304 or 201, both named in the range data, is settled when Jawdah quotes.

  • As centre. Its neighbours, the 50x80 and 50x100, are listed with the entry 'All'.

Next step

Request a quotation for Double Bowl Stainless Steel Sink 50x90

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.