Jawdah Industrial Co. Ltd.

Sinks · 50x100

Single Bowl Stainless Steel Sink 50x100

The 50x100 is the middle size of Jawdah's 50 cm width single bowl sinks, with the bowl offered on either side.

Size
50x100
Listed in sink table as
100X50 (50 cm width range)
Hole size
1.5”
SS thickness
0.35 / 0.4 / 0.5 mm

Overview

Quick answer

Single Bowl Stainless Steel Sink 50x100 is a one-bowl stainless kitchen sink listed by Jawdah and shown in the sink table as 100X50 in the 50 cm width range. The table records a right or left bowl, a 1.5-inch hole and sheet options of 0.35, 0.4 and 0.5 mm. Material for the sink range is deep-drawing stainless steel 304 and 201.

Overview

About Single Bowl Stainless Steel Sink 50x100

Sitting in the middle of the 50 cm width group, the 50x100 is longer than the 50x80 and shorter than the 50x120. It is also the longest 50 cm single bowl model that still lists three thickness options and a choice of bowl side. For many standard kitchen runs, that combination is the reason to shortlist it.

Five single bowl sizes make up the 50 cm width range in Jawdah's list: 50x50, 50x80, 50x100, 50x120 and 50x150. This page covers the third of them, recorded in the sink table as 100X50.

Its verified data mirrors the 50x80: a 1.5-inch hole, a bowl on the right or left, and stainless sheet at 0.35, 0.4 or 0.5 mm. What changes is the overall length, which leaves more counter beside the bowl. The next size up, the 50x120, switches to a centred bowl and a single 0.5 mm thickness.

The grades given for the sink range, deep-drawing stainless steel 304 and 201, are range data, not a value confirmed for this size alone. Confirm the grade, sheet thickness and bowl side with Jawdah when you request the quotation.

Choose the 50x100 when you want an offset bowl and a choice of thickness with more length than the 50x80. If you need a centred bowl, the 50x120 is the nearest alternative in this width. If your counter is 60 cm deep, compare the 60x100, which has a larger hole. Confirm details with Jawdah.

Types

Sizes and variants

Other listed sizes of this product: 50x50, 50x80, 50x120, 50x150, 60x60, 60x100, 60x120 and 60x150.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Standard kitchen runs in villas and apartments
  • Office pantries where some counter space beside the bowl is useful
  • Staff kitchens in schools, clinics and small commercial buildings
  • Replacement of an older single bowl sink of similar length

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Single Bowl Stainless Steel Sink 50x100: recorded data
PropertyValueSource
Size / model (product list)50x100Jawdah product list
Listed in sink table as100X50 (50 cm width range)Jawdah product data
Hole size1.5”Jawdah product data
SS thickness0.35 / 0.4 / 0.5 mmJawdah product data
Bowl positionRight / LeftJawdah product data
Material (sink range)Deep-drawing stainless steel 304 and 201Jawdah product data

Key facts

  1. Single Bowl Stainless Steel Sink 50x100 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel kitchen sink with one bowl.
  3. Recorded for this size: listed in sink table as: 100X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.35 / 0.4 / 0.5 mm; bowl position: Right / Left.
  4. Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (50x100)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The 50x100 lists a right or left bowl and three thicknesses (0.35, 0.4, 0.5 mm). The 50x120 lists a centred bowl and 0.5 mm only. Both have a 1.5-inch hole.

  • Yes, on the verified rows: both have a 1.5-inch hole, a right or left bowl and the same three thickness options. Length is the difference.

  • Yes. Jawdah also lists a 60x100 single bowl sink in the 60 cm width range, which has its own hole size and thickness data.

Next step

Request a quotation for Single Bowl Stainless Steel Sink 50x100

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.