Jawdah Industrial Co. Ltd.

Sinks · 50x120

Single Bowl Stainless Steel Sink 50x120

The 50x120 single bowl stainless steel sink is a longer unit from Jawdah's 50 cm width range with its bowl centred and a single listed thickness.

Size
50x120
Listed in sink table as
120X50 (50 cm width range)
Hole size
1.5”
SS thickness
0.5 mm

Overview

Quick answer

Single Bowl Stainless Steel Sink 50x120 is a 120X50 one-bowl sink in Jawdah's 50 cm width range. The sink table lists a centred bowl, a 1.5-inch hole and 0.5 mm stainless sheet. It is the second-longest single bowl size in that width. Range data gives the material as deep-drawing stainless steel, grades 304 and 201.

Overview

About Single Bowl Stainless Steel Sink 50x120

Unlike the shorter offset models, the 50x120 places its single bowl in the middle of a long unit. Jawdah's sink table records one thickness for it, 0.5 mm, rather than the range of thickness options listed for the 50x80 and 50x100. Buyers who prefer a symmetrical layout on a long 50 cm counter will find this the first size that offers it.

This is the fourth of five sizes in the 50 cm width single bowl range, after 50x50, 50x80 and 50x100 and before 50x150. The sink table writes it as 120X50.

Three verified rows define it. The bowl position is centre. The hole size is 1.5 inches, like every 50 cm width model. The stainless thickness is 0.5 mm, a single value, whereas the shorter offset sizes list a choice of three thicknesses.

Material is published at range level as deep-drawing stainless steel 304 and 201, so the grade for this unit is set when Jawdah prepares the quotation. Include your cut-out drawing and outlet details with the enquiry.

Choose the 50x120 when you want a centred bowl with counter length on both sides in a 50 cm width. If you prefer the bowl to one side, the 50x100 lists right or left. For the longest 50 cm unit, see the 50x150, which shares this model's centred bowl and 0.5 mm sheet. Confirm grade and cut-out with Jawdah.

Types

Sizes and variants

Other listed sizes of this product: 50x50, 50x80, 50x100, 50x150, 60x60, 60x100, 60x120 and 60x150.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Long kitchen counters where a symmetrical sink layout is wanted
  • Shared office kitchens with work space on both sides of the bowl
  • Kitchen islands or peninsulas in residential projects
  • Service kitchens in mosques, schools and community buildings

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Single Bowl Stainless Steel Sink 50x120: recorded data
PropertyValueSource
Size / model (product list)50x120Jawdah product list
Listed in sink table as120X50 (50 cm width range)Jawdah product data
Hole size1.5”Jawdah product data
SS thickness0.5 mmJawdah product data
Bowl positionCentreJawdah product data
Material (sink range)Deep-drawing stainless steel 304 and 201Jawdah product data

Key facts

  1. Single Bowl Stainless Steel Sink 50x120 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel kitchen sink with one bowl.
  3. Recorded for this size: listed in sink table as: 120X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.5 mm; bowl position: Centre.
  4. Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (50x120)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The sink table gives 0.5 mm for this model. The grade (304 or 201, from the range data) is confirmed with your quotation.

  • Centred. The sink table records a centre bowl position for this size, unlike the 50x80 and 50x100, which list right or left.

  • The 50x150 shares its centred bowl, 1.5-inch hole and 0.5 mm sheet, and is longer. The 50x100 is shorter and lists an offset bowl.

Next step

Request a quotation for Single Bowl Stainless Steel Sink 50x120

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.