Sinks · 60x150
Single Bowl Stainless Steel Sink 60x150
The 60x150 is the largest single bowl stainless steel sink in Jawdah's product list, closing the 60 cm width range with a centred bowl.
- Size
- 60x150
- Listed in sink table as
- 150X60 (60 cm width range)
- Hole size
- 3”
- Bowl position
- Centre
Overview
Quick answer
Single Bowl Stainless Steel Sink 60x150 is the longest and widest one-bowl sink Jawdah lists, recorded as 150X60 in the sink table. The bowl is centred, the hole is 3 inches, and the stainless thickness is 0.5 mm for grade 201 or 0.6 mm for grade 304, from the deep-drawing stainless steel used across the sink range.
Overview
About Single Bowl Stainless Steel Sink 60x150
Nine single bowl sizes appear in Jawdah's product list, and the 60x150 is the biggest of them. It combines the 60 cm width with the 150 length, places the bowl centrally and uses the 3-inch hole of the wider group. Projects with long, deep counters and a single washing point are where this size is usually considered.
In the sink table this model is 150X60, the final entry of the 60 cm width range. The 50x150 shares its length but is narrower, and the 60x120 shares its width but is shorter.
Its rows record a centre bowl, a 3-inch hole and a grade-linked thickness of 0.5 mm in grade 201 or 0.6 mm in grade 304. Those rows are the same as the 60x120 and the 60x60, so within the 60 cm group the main thing that changes as you move up to this size is length.
Because this is the largest unit in the list, check access for delivery into the room and the counter support before ordering. Jawdah confirms the grade and the cut-out with your quotation.
Choose the 60x150 when the counter is 60 cm deep, the run is long and one centred bowl is enough. For a shorter run with the same data, the 60x120 is the alternative. On a 50 cm counter, the 50x150 offers the same length with a smaller hole. Confirm grade 201 or 304 with Jawdah.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Long villa kitchens where one central bowl serves a full counter
- Staff and community kitchens with heavy daily use of the worktop
- Back-of-house preparation areas in cafes and small food outlets
- Utility and laundry rooms that need a long stainless counter
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 60x150 | Jawdah product list |
| Listed in sink table as | 150X60 (60 cm width range) | Jawdah product data |
| Hole size | 3” | Jawdah product data |
| SS thickness | 0.5 mm (grade 201) / 0.6 mm (grade 304) | Jawdah product data |
| Bowl position | Centre | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Single Bowl Stainless Steel Sink 60x150 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with one bowl.
- Recorded for this size: listed in sink table as: 150X60 (60 cm width range); hole size: 3”; ss thickness: 0.5 mm (grade 201) / 0.6 mm (grade 304); bowl position: Centre.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (60x150)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. Of the nine single bowl sizes in Jawdah's product list, 60x150 is the largest. The smallest is 50x50.
The sink table records 0.5 mm in grade 201 and 0.6 mm in grade 304 for this model.
Check the counter cut-out and support, delivery access to the room and the 3-inch waste connection. Jawdah confirms the grade and cut-out with your quotation.

Next step
Request a quotation for Single Bowl Stainless Steel Sink 60x150
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.


