Sinks · 50x50
Single Bowl Stainless Steel Sink 50x50
The 50x50 is the most compact single bowl stainless steel sink in Jawdah's product list, with its bowl set in the centre.
- Size
- 50x50
- Listed in sink table as
- 50X50 (50 cm width range)
- Hole size
- 1.5”
- SS thickness
- 0.35 / 0.4 / 0.5 mm
Overview
Quick answer
Single Bowl Stainless Steel Sink 50x50 is the smallest of the nine single bowl sizes Jawdah lists. The sink table places it in the 50 cm width range, gives it a 1.5-inch hole and a centred bowl, and records three sheet thicknesses: 0.35, 0.4 and 0.5 mm. Across the sink range the material is deep-drawing stainless steel, grades 304 and 201.
Overview
About Single Bowl Stainless Steel Sink 50x50
Small kitchens and tea points rarely have room for a long sink with a side area, and that is where the 50x50 fits. It is the smallest single bowl size in Jawdah's list and the only one in the 50 cm width range with equal sides. The bowl sits in the centre, the outlet hole is 1.5 inches, and three sheet thicknesses are recorded.
At 50x50 this sink opens Jawdah's single bowl range, which runs up to 50x150 in the 50 cm width group and to 60x150 in the 60 cm group. The sink table lists it as 50X50 within the 50 cm width range, with the single bowl positioned in the centre of the unit.
Its outlet hole is 1.5 inches, the same as the other 50 cm width sizes, while the 60 cm group moves to a larger hole. Thickness is where this model gives the buyer a choice: 0.35, 0.4 or 0.5 mm stainless sheet is listed. The longer 50x120 and 50x150 sizes are recorded at 0.5 mm only.
Material is published for the sink range rather than per size: deep-drawing stainless steel in grades 304 and 201. The table does not say which grade goes with which thickness for this model, so the grade and sheet are both fixed with the quotation.
Pick the 50x50 when the counter allows only a compact square unit and a centred bowl is acceptable. If you want the bowl offset to one side, the 50x80 is the next size up and lists right or left bowl positions. Confirm the thickness, the grade and the cut-out dimensions with Jawdah before ordering.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Tea and coffee points in offices and majlis service corners
- Small apartment kitchens with limited counter length
- Staff rest rooms and guard rooms that need a basic washing point
- Laboratory or workshop corners where a compact metal sink is typical
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 50x50 | Jawdah product list |
| Listed in sink table as | 50X50 (50 cm width range) | Jawdah product data |
| Hole size | 1.5” | Jawdah product data |
| SS thickness | 0.35 / 0.4 / 0.5 mm | Jawdah product data |
| Bowl position | Centre | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Single Bowl Stainless Steel Sink 50x50 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with one bowl.
- Recorded for this size: listed in sink table as: 50X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.35 / 0.4 / 0.5 mm; bowl position: Centre.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (50x50)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. Among the nine single bowl sizes in Jawdah's product list, 50x50 is the smallest. The largest is 60x150.
The sink table gives 0.35, 0.4 and 0.5 mm for this model. Tell Jawdah which one you need, and the grade (304 or 201, from the range data) is confirmed alongside it.
The sink table records a centre bowl position for this size, with a 1.5-inch outlet hole.

Next step
Request a quotation for Single Bowl Stainless Steel Sink 50x50
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.


