Sinks · 60x60
Single Bowl Stainless Steel Sink 60x60
The 60x60 is the entry size of Jawdah's 60 cm width single bowl sinks: a square unit with a centred bowl and a 3-inch hole.
- Size
- 60x60
- Listed in sink table as
- 60X60 (60 cm width range)
- Hole size
- 3”
- Bowl position
- Centre
Overview
Quick answer
Single Bowl Stainless Steel Sink 60x60 is a square one-bowl stainless sink and the first size in the 60 cm width range of Jawdah's sink table. It lists a centre bowl and a 3-inch hole. Thickness is tied to grade: 0.5 mm in grade 201 or 0.6 mm in grade 304, both deep-drawing stainless steel.
Overview
About Single Bowl Stainless Steel Sink 60x60
For a deeper 60 cm counter, the 60x60 is where Jawdah's wider single bowl sinks begin. It is square, keeps the bowl in the centre and moves to a 3-inch outlet hole. It is also the first size on this list whose datasheet row links sheet thickness directly to the steel grade, which makes ordering the grade a single, clear decision.
Jawdah lists four single bowl sizes in the 60 cm width range: 60x60, 60x100, 60x120 and 60x150. The 60x60 is the shortest of them and the only square one. In the sink table it appears as 60X60.
Its rows read: centre bowl, 3-inch hole, and stainless thickness of 0.5 mm for grade 201 or 0.6 mm for grade 304. That pairing of thickness and grade is recorded for every 60 cm model, whereas the 50 cm models list thickness without naming the grade.
Set beside the 50x50, the other square unit, the 60x60 is wider and has the larger outlet. If you are matching an existing waste fitting, check that a 3-inch connection suits it before you choose this size over the 50 cm option.
Choose the 60x60 for a square sink on a 60 cm counter with a centred bowl. If the counter is only 50 cm deep, the 50x50 is the square alternative with a smaller hole. If you want an offset bowl in this width, the 60x100 lists right or left. Tell Jawdah whether you need grade 201 or 304.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Kitchens with 60 cm deep counters and limited length
- Corner or utility positions where a square unit fits better than a long one
- Tea rooms in offices and clinics that use a 3-inch waste connection
- Replacement of an existing square 60 cm sink
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 60x60 | Jawdah product list |
| Listed in sink table as | 60X60 (60 cm width range) | Jawdah product data |
| Hole size | 3” | Jawdah product data |
| SS thickness | 0.5 mm (grade 201) / 0.6 mm (grade 304) | Jawdah product data |
| Bowl position | Centre | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Single Bowl Stainless Steel Sink 60x60 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with one bowl.
- Recorded for this size: listed in sink table as: 60X60 (60 cm width range); hole size: 3”; ss thickness: 0.5 mm (grade 201) / 0.6 mm (grade 304); bowl position: Centre.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (60x60)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The sink table pairs 0.6 mm with grade 304 and 0.5 mm with grade 201 for this model. Choose the grade, and the thickness follows.
A 3-inch hole, as listed in Jawdah's sink table for the 60 cm width range.
Both are square with a centred bowl. The 60x60 is in the 60 cm width range and lists a 3-inch hole with grade-linked thickness; the 50x50 is narrower with a smaller hole.

Next step
Request a quotation for Single Bowl Stainless Steel Sink 60x60
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.


