Sinks · 50x150
Single Bowl Stainless Steel Sink 50x150
The 50x150 is the longest single bowl stainless steel sink in Jawdah's 50 cm width range, with a centred bowl.
- Size
- 50x150
- Listed in sink table as
- 150X50 (50 cm width range)
- Hole size
- 1.5”
- SS thickness
- 0.5 mm
Overview
Quick answer
Single Bowl Stainless Steel Sink 50x150 is a long one-bowl unit that tops the 50 cm width range in Jawdah's sink table, where it appears as 150X50. It lists a centre bowl, a 1.5-inch hole and 0.5 mm stainless sheet. The sink range material is deep-drawing stainless steel in grades 304 and 201.
Overview
About Single Bowl Stainless Steel Sink 50x150
When a single bowl has to serve a long run of counter, the 50x150 is the size that closes the 50 cm width group. Nothing in that width is longer. Its verified rows match the 50x120, centre bowl, 1.5-inch outlet and 0.5 mm sheet, so length is what sets it apart from its closest sibling.
Jawdah's sink table lists this model as 150X50, the last entry in the 50 cm width range for single bowl sinks. In the full single bowl list only the 60x150 matches its length, and that one belongs to the wider 60 cm group.
The bowl is centred, the hole is 1.5 inches and the stainless sheet is 0.5 mm. These values are identical to the 50x120, so the extra length is the practical difference. Compared with the 60x150, it is narrower and keeps the smaller outlet listed for 50 cm models.
As with all Jawdah sinks, grade information is range data: deep-drawing stainless steel 304 and 201. Confirm the grade for this unit, the cut-out and the outlet connection when you ask Jawdah for a quotation.
Choose the 50x150 when the counter is long but only 50 cm of width is available. If the length is more than you need, the 50x120 keeps the same verified rows in a shorter unit. If the counter is deeper, compare the 60x150, which lists a larger hole and grade-linked thicknesses.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Long kitchen counters in villas where the sink spans a full run
- Commercial pantries with work space either side of a central bowl
- Community and staff kitchens where several people use the counter
- Utility rooms that need a long stainless worktop with one bowl
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 50x150 | Jawdah product list |
| Listed in sink table as | 150X50 (50 cm width range) | Jawdah product data |
| Hole size | 1.5” | Jawdah product data |
| SS thickness | 0.5 mm | Jawdah product data |
| Bowl position | Centre | Jawdah product data |
| Material (sink range) | Deep-drawing stainless steel 304 and 201 | Jawdah product data |

Key facts
- Single Bowl Stainless Steel Sink 50x150 is listed under Sanitary Ware & Drainage Solutions.
- Role: a stainless steel kitchen sink with one bowl.
- Recorded for this size: listed in sink table as: 150X50 (50 cm width range); hole size: 1.5”; ss thickness: 0.5 mm; bowl position: Centre.
- Range data: material (sink range): Deep-drawing stainless steel 304 and 201.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (50x150)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. It is the last and longest single bowl size in that width in Jawdah's sink table, listed as 150X50.
The 50x150 is in the 50 cm width range with a 1.5-inch hole and 0.5 mm sheet. The 60x150 is in the 60 cm range and lists a larger hole and thickness tied to grade.
The sink range is made from deep-drawing stainless steel 304 and 201. The grade for your 50x150 unit is confirmed with the quotation.

Next step
Request a quotation for Single Bowl Stainless Steel Sink 50x150
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.


