Jawdah Industrial Co. Ltd.

Deep Flange Track · 102 (50/60)

Deep Flange Track 102 (50/60) – Partition Metal Profile

Deep Flange Track 102 (50/60) is a galvanised steel runner for metal stud partitions and the first three-digit size in Jawdah's deep flange list.

Size
102 (50/60)
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

The 102 (50/60) Deep Flange Track is a hot-dip galvanised steel runner fixed at floor and soffit to hold the studs of a drywall partition. In Jawdah's product list it follows 92 and comes before 125 and 152. The datasheet has no section for it, so Jawdah confirms its dimensions with the quotation; standard length is 3000 mm.

Overview

About Deep Flange Track 102 (50/60) – Partition Metal Profile

From 102 (50/60) onwards, Jawdah's deep flange sizes move into three figures. This track follows 92 and leads into the two largest sizes, 125 and 152. Like them, it has no section in the datasheet. What the buyer can rely on is the range data: galvanised steel to ASTM A653M, a 0.35 to 0.9 mm thickness range and 3000 mm standard lengths.

Length matters on site, and for 102 the datasheet's range figure is a standard length of 3000 mm. Runs along the floor and soffit are made up from these lengths, with the studs set between the track's deep flanges. The '(50/60)' in the name lists the two flange heights for the track; the flange height and section that apply to 102 are confirmed by Jawdah.

For the 102, the steel is hot-dip galvanised to ASTM A653M and is formed in thicknesses of 0.35 up to 0.9 mm, and other thicknesses can be requested. Fire references for the raw material are BS 476 Part 6 – 1989 and Class 1 surface flame spread under BS 476 Part 7 – 1997; the humidity reference is EN ISO 6270-2.

Pick 102 (50/60) when it is the size the partition is drawn at. Its neighbours are 92 below and 125 above, all three without datasheet sections, so ask Jawdah to confirm the 102 section, flange height and steel thickness with the quotation. If a datasheet section is required, the documented sizes are 52, 66 and 72.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:

  • Floor and soffit runner for drywall partitions specified at 102
  • Wall linings on metal frames where the design uses a 102 deep flange track
  • Thicker partitions with services in the cavity, where larger track sizes are typically used

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Deep Flange Track 102 (50/60) – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)102 (50/60)Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Deep Flange Track 102 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 125 (50/60), 152 (50/60).

RFQ / BOQ checklist

  • Profile and size (Deep Flange Track 102 (50/60))
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No. Jawdah lists two larger sizes, 125 and 152. The 102 follows 92 in the product list.

  • The datasheet gives a standard length of 3000 mm for the whole deep flange range.

  • No. Its section and flange height are confirmed by Jawdah with the quotation. Sections in the datasheet cover 52, 66 and 72 only.

Next step

Request a quotation for Deep Flange Track 102 (50/60)

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.