Jawdah Industrial Co. Ltd.

Deep Flange Track · 92 (50/60)

Deep Flange Track 92 (50/60) – Partition Metal Profile

Deep Flange Track 92 (50/60) is a galvanised steel floor and soffit runner in Jawdah's range, listed between the 77 and 102 sizes.

Size
92 (50/60)
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

The 92 (50/60) Deep Flange Track is a hot-dip galvanised steel runner that holds the studs of a drywall partition at floor and ceiling. Jawdah lists it between 77 and 102. The datasheet does not include a section for this size, so its dimensions come with the quotation; steel thickness for the range is 0.35 up to 0.9 mm.

Overview

About Deep Flange Track 92 (50/60) – Partition Metal Profile

Two questions matter when specifying a 92 (50/60) runner: what the steel is, and what the datasheet says about fire. For this size, the answers come from range-level data, since the datasheet documents only 52, 66 and 72. Its section dimensions are therefore confirmed by Jawdah, while the material references apply across all sizes.

The datasheet's fire references are for the raw material: BS 476 Part 6 – 1989, and surface flame spread Class 1 under BS 476 Part 7 – 1997. Its humidity reference is EN ISO 6270-2. These describe the steel, not a finished partition, and they are the same for every size in the range, including 92.

The steel is hot-dip galvanised and complies with ASTM A653M, in 0.35 up to 0.9 mm thickness with other thicknesses on request, supplied in 3000 mm lengths. Fixed at floor and soffit, the 92 runner holds the studs between its deep flanges. The '(50/60)' tag lists two flange heights for the track; the section and flange height of the 92 size are confirmed by Jawdah with the quotation.

Choose 92 (50/60) when the wall design is set at this size. Below it are 77 and 75; above it are 102, 125 and 152. None of these has a datasheet section, so compare them using dimensions confirmed by Jawdah. If you need a section stated in the datasheet, the largest documented size is 72.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:

  • Base and head runner for drywall partitions designed at 92
  • Metal-framed wall linings set out with a 92 deep flange track
  • Projects where the raw-material fire and humidity references of the track steel must be listed

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Deep Flange Track 92 (50/60) – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)92 (50/60)Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Deep Flange Track 92 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 102 (50/60), 125 (50/60), 152 (50/60).

RFQ / BOQ checklist

  • Profile and size (Deep Flange Track 92 (50/60))
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It cites BS 476 Part 6 – 1989 and Class 1 surface flame spread under BS 476 Part 7 – 1997, both for the raw material rather than the assembled wall.

  • Between 77 and 102 in Jawdah's product list, which runs from 42 to 152.

  • The datasheet does not list this size, so Jawdah confirms the section dimensions and flange height with the quotation.

Next step

Request a quotation for Deep Flange Track 92 (50/60)

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.