Deep Flange Track · 77 (50/60)
Deep Flange Track 77 (50/60) – Partition Metal Profile
Deep Flange Track 77 (50/60) is a hot-dip galvanised steel runner in Jawdah's deep flange range, listed between the 75 and 92 sizes.
- Size
- 77 (50/60)
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Jawdah lists the 77 (50/60) Deep Flange Track as one of ten runner sizes for metal-framed partitions. It is fixed to the floor and soffit to receive the studs. The datasheet does not give its section, so Jawdah confirms the dimensions with the quotation; the range is formed from hot-dip galvanised steel complying with ASTM A653M.
Overview
About Deep Flange Track 77 (50/60) – Partition Metal Profile
Two listed sizes sit very close together in the middle of the range: 75 and 77. The 77 (50/60) track is the second of them, and the gap to the next size, 92, is much wider. Because neither 75 nor 77 has a datasheet section, a buyer choosing between them should rely on the drawings and Jawdah's confirmed dimensions, not on the size numbers alone.
What the datasheet does state for 77 is the material. The track is formed from hot-dip galvanised steel complying with ASTM A653M, in thicknesses of 0.35 up to 0.9 mm, and other thicknesses can be requested. The raw material is referenced to BS 476 Part 6 – 1989 and Class 1 surface flame spread under BS 476 Part 7 – 1997, and to EN ISO 6270-2 for humidity.
In use, the 77 runner is fixed to the floor and soffit and holds the studs between its deep flanges. The '(50/60)' in its name refers to the two flange heights listed for the track. Its section dimensions and flange height are confirmed by Jawdah with the quotation, and it is supplied in the 3000 mm standard length given for the range.
Select 77 (50/60) where the design names this size. Its closest neighbours are 75 below and 92 above, and none of the three has a datasheet section. If a documented section is a requirement, the nearest is 72 at 60x72x60 mm. Confirm the 77 section, flange height and thickness with Jawdah before ordering.
Types
Sizes and variants
This page is the 77 (50/60) size.
Other deep flange track sizes: Deep Flange Track 42 (50/60), Deep Flange Track 52 (50/60), Deep Flange Track 66 (50/60), Deep Flange Track 72 (50/60) and Deep Flange Track 75 (50/60).
Other deep flange track sizes: Deep Flange Track 92 (50/60), Deep Flange Track 102 (50/60), Deep Flange Track 125 (50/60) and Deep Flange Track 152 (50/60).
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:
- Floor and soffit runner for partitions designed around the 77 size
- Metal-framed linings where the project specification lists a 77 deep flange track
- Matching runners when a project already uses 77 (50/60) profiles
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 77 (50/60) | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Deep Flange Track 77 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 92 (50/60), 102 (50/60), 125 (50/60), 152 (50/60).
RFQ / BOQ checklist
- Profile and size (Deep Flange Track 77 (50/60))
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Both are listed sizes without a datasheet section. They differ in size designation; Jawdah confirms the section dimensions of each with the quotation.
Hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick with other thicknesses on request.
No. The datasheet lists sections for 52, 66 and 72 only. For 77, the section is confirmed by Jawdah with the quotation.

Next step
Request a quotation for Deep Flange Track 77 (50/60)
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
