Deep Flange Track · 52 (50/60)
Deep Flange Track 52 (50/60) – Partition Metal Profile
Deep Flange Track 52 (50/60) is a galvanised steel partition runner whose datasheet section is 60x52x60 mm with a 60 mm flange.
- Size
- 52 (50/60)
- Section
- 60x52x60 mm (60 mm flange)
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
The 52 (50/60) size is the smallest Deep Flange Track that Jawdah's datasheet gives a section for: 60x52x60 mm, in the 60 mm flange version. It is fixed to the floor and soffit to hold the studs of a drywall partition, formed from hot-dip galvanised steel to ASTM A653M and supplied in 3000 mm lengths.
Overview
About Deep Flange Track 52 (50/60) – Partition Metal Profile
Of the ten deep flange sizes Jawdah lists, 52 (50/60) is the first one with a printed section. The datasheet shows it as 60x52x60 mm in the 60 mm flange version. That makes it a useful reference point when comparing the smaller 42 size, which has no datasheet section, with the larger tracks further up the list.
This runner is set at the base and head of a stud partition, with the studs held between its deep flanges. The datasheet lists its section as 60x52x60 mm and identifies the 60 mm flange version. The '(50/60)' in the size name refers to the two flange heights listed for the track; only the 60 mm version is shown in the datasheet for this size, so a 50 mm flange should be confirmed with Jawdah.
The steel is hot-dip galvanised and complies with ASTM A653M. Thickness runs from 0.35 up to 0.9 mm, with other thicknesses on request, and the standard length is 3000 mm. The raw material is referenced to BS 476 Part 6 – 1989 and to Class 1 surface flame spread under BS 476 Part 7 – 1997 for fire, and to EN ISO 6270-2 for humidity.
Pick 52 (50/60) when the partition is detailed for this size and you want a section stated in the datasheet. The smaller 42 has no datasheet section; the next documented size up is 66 (50/60) at 60x66x60 mm. Confirm the flange height you need, since only the 60 mm version is listed, and the steel thickness for the wall.
Types
Sizes and variants
This page is the 52 (50/60) size.
Other deep flange track sizes: Deep Flange Track 42 (50/60), Deep Flange Track 66 (50/60), Deep Flange Track 72 (50/60), Deep Flange Track 75 (50/60) and Deep Flange Track 77 (50/60).
Other deep flange track sizes: Deep Flange Track 92 (50/60), Deep Flange Track 102 (50/60), Deep Flange Track 125 (50/60) and Deep Flange Track 152 (50/60).
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:
- Floor and soffit runner for drywall partitions specified at 52
- Metal-framed wall linings where a datasheet-documented section is required for submittals
- Projects comparing 52 and 66 tracks against the datasheet sections
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 52 (50/60) | Jawdah product list |
| Section (datasheet) | 60x52x60 mm (60 mm flange) | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Deep Flange Track 52 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
- Datasheet section for this size: 60x52x60 mm (60 mm flange).
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 102 (50/60), 125 (50/60), 152 (50/60).
RFQ / BOQ checklist
- Profile and size (Deep Flange Track 52 (50/60))
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It gives 60x52x60 mm, in the 60 mm flange version. This is the smallest of the three sizes with a datasheet section.
The size name carries (50/60), the two flange heights listed for the track, but the datasheet shows only the 60 mm flange for this size. Ask Jawdah to confirm a 50 mm flange with the quotation.
Hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick with other thicknesses on request, in 3000 mm standard lengths.

Next step
Request a quotation for Deep Flange Track 52 (50/60)
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
