Deep Flange Track · 72 (50/60)
Deep Flange Track 72 (50/60) – Partition Metal Profile
Deep Flange Track 72 (50/60) is a galvanised steel runner for drywall partitions, documented in the datasheet as 60x72x60 mm.
- Size
- 72 (50/60)
- Section
- 60x72x60 mm (60 mm flange)
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
The 72 (50/60) size is the largest Deep Flange Track with a section in Jawdah's datasheet: 60x72x60 mm, 60 mm flange version. Above it, sizes 75 to 152 are listed without datasheet sections. It is a hot-dip galvanised steel runner fixed to the floor and soffit to hold studs, supplied in 3000 mm standard lengths.
Overview
About Deep Flange Track 72 (50/60) – Partition Metal Profile
When a partition needs the largest track that still has a datasheet section, Jawdah's deep flange range offers 72 (50/60). The datasheet gives its section as 60x72x60 mm in the 60 mm flange version. The very next listed size, 75 (50/60), is close in number but has no datasheet section, so the two should not be treated as interchangeable.
The 72 track forms the floor and soffit runner of a metal stud partition, with the studs located between its deeper flanges. Its datasheet section is 60x72x60 mm with a 60 mm flange. The '(50/60)' in the name lists two flange heights for the track; for a 50 mm flange on this size, ask Jawdah to confirm.
Humidity performance of the raw material is referenced to EN ISO 6270-2, and its fire references are BS 476 Part 6 – 1989 and Class 1 surface flame spread under BS 476 Part 7 – 1997. The track is formed from hot-dip galvanised steel complying with ASTM A653M, in 0.35 up to 0.9 mm thickness or other thicknesses on request. Standard lengths are 3000 mm, so a run along a floor or soffit is built up from these lengths.
Choose 72 (50/60) when the design calls for it, or when you need the largest size that has a datasheet section. The documented size below it is 66 (60x66x60 mm). Sizes above, starting at 75 and 77, have their sections confirmed by Jawdah with the quotation, so check them separately rather than assuming they match 72.
Types
Sizes and variants
This page is the 72 (50/60) size.
Other deep flange track sizes: Deep Flange Track 42 (50/60), Deep Flange Track 52 (50/60), Deep Flange Track 66 (50/60), Deep Flange Track 75 (50/60) and Deep Flange Track 77 (50/60).
Other deep flange track sizes: Deep Flange Track 92 (50/60), Deep Flange Track 102 (50/60), Deep Flange Track 125 (50/60) and Deep Flange Track 152 (50/60).
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:
- Floor and soffit runner for drywall partitions specified at 72
- Metal-framed wall linings where the largest datasheet-documented deep flange section is preferred
- Partition submittals that need the 60x72x60 mm section in writing
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 72 (50/60) | Jawdah product list |
| Section (datasheet) | 60x72x60 mm (60 mm flange) | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Deep Flange Track 72 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
- Datasheet section for this size: 60x72x60 mm (60 mm flange).
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 102 (50/60), 125 (50/60), 152 (50/60).
RFQ / BOQ checklist
- Profile and size (Deep Flange Track 72 (50/60))
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. The datasheet documents 52, 66 and 72. Of these, 72 (50/60) is the largest, at 60x72x60 mm with a 60 mm flange.
No. 75 (50/60) is a separate listed size with no datasheet section. Jawdah confirms its dimensions with the quotation.
The datasheet references EN ISO 6270-2 for humidity. Like the fire references, it applies to the raw material of the track.

Next step
Request a quotation for Deep Flange Track 72 (50/60)
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
