Deep Flange Track · 125 (50/60)
Deep Flange Track 125 (50/60) – Partition Metal Profile
Deep Flange Track 125 (50/60) is the second-largest size of Jawdah's galvanised steel deep flange runner for drywall partitions.
- Size
- 125 (50/60)
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Jawdah's 125 (50/60) Deep Flange Track is a galvanised steel runner fixed at floor and soffit to hold partition studs. Only 152 is larger in the listed range. Its section is not in the datasheet and is confirmed with the quotation, while range data gives 0.35 up to 0.9 mm steel, with other thicknesses on request.
Overview
About Deep Flange Track 125 (50/60) – Partition Metal Profile
Near the top of the range, the 125 (50/60) track sits between 102 and the largest size, 152. For a larger runner like this, the steel thickness is worth settling early, and the datasheet leaves room for it: 0.35 up to 0.9 mm, or other thicknesses on request. Section dimensions for 125 are not printed, so Jawdah confirms them with the quotation.
Thickness for the 125 track is chosen within the datasheet's range of 0.35 up to 0.9 mm, and other thicknesses can be requested. The steel is hot-dip galvanised to ASTM A653M and supplied in a standard 3000 mm length. Its raw-material references are BS 476 Part 6 – 1989 and Class 1 surface flame spread under BS 476 Part 7 – 1997 for fire, and EN ISO 6270-2 for humidity.
Installed, the 125 runner is fixed along the floor and soffit and holds the stud ends between flanges deeper than those of the standard Track. The '(50/60)' tag gives the two flange heights listed for the track. The datasheet does not list this size, so its section dimensions and flange height come from Jawdah with the quotation.
Choose 125 (50/60) when the partition is drawn at this size. The next size up is 152, the largest listed; the next down is 102. Neither has a datasheet section, so compare confirmed dimensions from Jawdah. Agree the steel thickness at the same time, within 0.35 to 0.9 mm or as a special request.
Types
Sizes and variants
This page is the 125 (50/60) size.
Other deep flange track sizes: Deep Flange Track 42 (50/60), Deep Flange Track 52 (50/60), Deep Flange Track 66 (50/60), Deep Flange Track 72 (50/60) and Deep Flange Track 75 (50/60).
Other deep flange track sizes: Deep Flange Track 77 (50/60), Deep Flange Track 92 (50/60), Deep Flange Track 102 (50/60) and Deep Flange Track 152 (50/60).
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:
- Base and head runner for partitions designed at 125
- Metal-framed wall linings detailed with a 125 deep flange track
- Deeper partitions carrying services in the cavity, where larger runner sizes are typically specified
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 125 (50/60) | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Deep Flange Track 125 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 102 (50/60), 152 (50/60).
RFQ / BOQ checklist
- Profile and size (Deep Flange Track 125 (50/60))
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
102 is the next size down and 152, the largest listed, is the next size up.
The datasheet gives 0.35 up to 0.9 mm and allows other thicknesses on request. Confirm the thickness with Jawdah at quotation.
Not in the datasheet, which covers 52, 66 and 72 only. Jawdah confirms the 125 section and flange height with the quotation.

Next step
Request a quotation for Deep Flange Track 125 (50/60)
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
