Jawdah Industrial Co. Ltd.

Deep Flange Track · 152 (50/60)

Deep Flange Track 152 (50/60) – Partition Metal Profile

Deep Flange Track 152 (50/60) is the largest listed size of Jawdah's galvanised steel deep flange runner for metal-framed partitions.

Size
152 (50/60)
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

The 152 (50/60) Deep Flange Track is the top of Jawdah's listed range, which starts at 42. It is a hot-dip galvanised steel runner fixed at the floor and soffit to hold drywall studs. The datasheet gives no section for it, so dimensions and flange height are confirmed with the quotation; range data gives 3000 mm lengths.

Overview

About Deep Flange Track 152 (50/60) – Partition Metal Profile

If the wall design calls for the biggest deep flange runner Jawdah lists, this is it: 152 (50/60). The range climbs from 42 through ten sizes to reach it, and the step down is 125. Like most of the range, it has no section in the datasheet, so everything specific to its geometry is confirmed by Jawdah when quoting.

Its role in the partition is the same as the smaller sizes: the track runs along the floor and soffit and holds the stud ends between its deep flanges. The '(50/60)' tag lists the two flange heights for the track. For 152, the section dimensions and which flange height applies are confirmed by Jawdah, because the datasheet's sections stop at 72.

Range data from the datasheet still applies. The material is hot-dip galvanised steel complying with ASTM A653M, made in 0.35 up to 0.9 mm thickness with other thicknesses on request, in a standard length of 3000 mm. The raw material carries fire references to BS 476 Part 6 – 1989 and Class 1 surface flame spread to BS 476 Part 7 – 1997, and a humidity reference to EN ISO 6270-2.

Use 152 (50/60) only where the drawings call for the largest listed size; nothing larger is listed. The nearest alternative is 125, also without a datasheet section. Ask Jawdah to confirm the 152 section, flange height and steel thickness with the quotation, and confirm the matching stud at the same time.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:

  • Floor and soffit runner for partitions designed at the largest listed size, 152
  • Metal-framed wall linings where the project specifies a 152 deep flange track
  • Wide partitions with services in the cavity, where the largest track sizes are typically chosen

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Deep Flange Track 152 (50/60) – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)152 (50/60)Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Deep Flange Track 152 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42 (50/60), 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 102 (50/60), 125 (50/60).

RFQ / BOQ checklist

  • Profile and size (Deep Flange Track 152 (50/60))
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. The listed range runs from 42 up to 152 (50/60); the next size down is 125.

  • The datasheet lists deep flange sections for 52, 66 and 72 only. For 152, Jawdah confirms the section and flange height with the quotation.

  • Range data from the datasheet: hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick or other thicknesses on request, and 3000 mm standard lengths.

Next step

Request a quotation for Deep Flange Track 152 (50/60)

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.