Deep Flange Track · 42 (50/60)
Deep Flange Track 42 (50/60) – Partition Metal Profile
Deep Flange Track 42 (50/60) is the smallest size in Jawdah's deep flange runner range for metal-framed drywall partitions.
- Size
- 42 (50/60)
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
The 42 (50/60) Deep Flange Track is a galvanised steel runner with deeper flanges, fixed at floor and soffit to receive the studs of a drywall partition. It is the smallest of ten listed sizes. The datasheet does not list a section for it, so Jawdah confirms its dimensions with the quotation.
Overview
About Deep Flange Track 42 (50/60) – Partition Metal Profile
At the bottom of Jawdah's deep flange range sits the 42 (50/60) size. Nothing smaller is listed, and the next step up is 52 (50/60), the first size with a section in the datasheet. If your drawings call for this size, treat its exact section as something to settle with Jawdah at quotation rather than reading it from a neighbouring size.
Like every deep flange track, this runner is fixed to the floor and soffit and holds the studs between its flanges, which are deeper than those of the standard Track. The '(50/60)' tag in the name refers to the two flange heights listed for the track. For the 42 size, the datasheet gives no section, so neither the web nor the flange dimensions are stated here.
What the datasheet does give applies across the range: the steel is 0.35 up to 0.9 mm thick, with other thicknesses on request, and standard lengths are 3000 mm. The material is hot-dip galvanised steel complying with ASTM A653M; its raw-material fire references are BS 476 Part 6 – 1989 and Class 1 surface flame spread to BS 476 Part 7 – 1997, and its humidity reference is EN ISO 6270-2.
Choose 42 (50/60) only where the design specifies this size; it is the smallest in the list. If you need a size whose section is printed in the datasheet, the nearest is 52 (50/60) at 60x52x60 mm. For 42, ask Jawdah to confirm the section, flange height and steel thickness with the quotation.
Types
Sizes and variants
This page is the 42 (50/60) size.
Other deep flange track sizes: Deep Flange Track 52 (50/60), Deep Flange Track 66 (50/60), Deep Flange Track 72 (50/60), Deep Flange Track 75 (50/60) and Deep Flange Track 77 (50/60).
Other deep flange track sizes: Deep Flange Track 92 (50/60), Deep Flange Track 102 (50/60), Deep Flange Track 125 (50/60) and Deep Flange Track 152 (50/60).
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The deep flange track is used in:
- Base and head runner for drywall partitions designed around the 42 size
- Metal-framed wall linings where the drawings call for the smallest listed track
- Matching runners on projects already detailed with 42 (50/60) profiles
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 42 (50/60) | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Deep Flange Track 42 (50/60) is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: a track with deeper flanges, fixed to the floor and soffit to hold the studs.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 52 (50/60), 66 (50/60), 72 (50/60), 75 (50/60), 77 (50/60), 92 (50/60), 102 (50/60), 125 (50/60), 152 (50/60).
RFQ / BOQ checklist
- Profile and size (Deep Flange Track 42 (50/60))
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. Jawdah's product list starts the range at 42 (50/60) and runs up to 152 (50/60). The next size is 52 (50/60).
No. The datasheet lists sections only for 52, 66 and 72. For 42 (50/60), Jawdah confirms the section dimensions and flange height with the quotation.
The datasheet's range data gives hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick or other thicknesses on request, in 3000 mm standard lengths.

Next step
Request a quotation for Deep Flange Track 42 (50/60)
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
